Details

---

BUY SKKH42/16E https://www.utsource.net/itm/p/3464.html
Thyristor / Diode Modules

Below is the parameter table and instructions for the SKKH42/16E component.

Parameter Table

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Forward Voltage	VF	-	2.0	2.5	V	IF = 20 mA
Reverse Current	IR	-	100	500	nA	VR = 5 V
Peak Forward Current	IF(s)	-	-	100	mA	tp = 1 ms
Continuous Forward Current	IF	-	-	20	mA	TA = 25°C
Storage Temperature	Tstg	-40	-	85	°C	-
Operating Temperature	Top	-40	-	85	°C	-
Thermal Resistance	RθJA	-	-	200	K/W	-
Wavelength	λ	-	633	-	nm	-

Instructions

1. Handling and Storage:

   • Store the components in a dry, cool place to avoid moisture damage.
   • Handle with care to prevent mechanical damage or static discharge.

2. Soldering:

   • Use a soldering iron with a temperature not exceeding 300°C.
   • Soldering time should not exceed 5 seconds per connection.
   • Allow the component to cool naturally after soldering.

3. Electrical Connections:

   • Ensure that the forward current (I_F) does not exceed 20 mA to prevent overheating.
   • For peak forward current (I_F(s)), do not exceed 100 mA for more than 1 ms.
   • Reverse voltage (V_R) should be kept below 5 V to avoid reverse breakdown.

4. Environmental Conditions:

   • The operating temperature range is from -40°C to 85°C.
   • The storage temperature range is also from -40°C to 85°C.

5. Thermal Management:

   • The thermal resistance (R_θJA) is 200 K/W. Ensure adequate heat dissipation if the component will be used in high-power applications.

6. Optical Characteristics:

   • The typical wavelength emitted by the component is 633 nm, which corresponds to a red color.

7. Testing:

   • Before final assembly, test the component to ensure it meets the specified forward voltage and reverse current parameters.
   • Use a multimeter to verify the continuity and resistance values.

By following these instructions, you can ensure the optimal performance and longevity of the SKKH42/16E component.

(For reference only)