Details

---

BUY CD4023 https://www.utsource.net/itm/p/67796.html
Buffered Triple 3-Input NAND Gate

Parameter	Symbol	Min	Typical	Max	Unit	Condition
Supply Voltage	VDD	3	-	18	V	-
Input Low Voltage	VIL	-	-	0.5	V	VDD = 5V
Input High Voltage	VIH	2.5	-	-	V	VDD = 5V
Output Low Voltage	VOL	0.4	-	0.6	V	IOL = 4mA, VDD = 5V
Output High Voltage	VOH	2.4	-	-	V	IOH = -0.4mA, VDD = 5V
Input Leakage Current	IIL	-	-	1	渭A	VDD = 5V
Output Leakage Current	IOL	-	-	1	渭A	VDD = 5V
Propagation Delay Time (Typical)	td	-	18	-	ns	VDD = 5V, f = 10MHz
Power Dissipation	PD	-	-	100	mW	-

Instructions for Using CD4023:

1. Power Supply:

   • The CD4023 operates with a supply voltage range from 3V to 18V. Ensure that the supply voltage is within this range to avoid damage to the device.

2. Input Levels:

   • For reliable operation, input signals should be below 0.5V for a logic low and above 2.5V for a logic high when using a 5V supply.

3. Output Levels:

   • The output low voltage (V_OL) is typically 0.4V to 0.6V when sourcing 4mA.
   • The output high voltage (V_OH) is typically 2.4V or higher when sinking 0.4mA.

4. Leakage Current:

   • Both input and output leakage currents are typically 1渭A. This should be considered when designing circuits to ensure proper signal integrity.

5. Propagation Delay:

   • The typical propagation delay time is 18ns at a 5V supply and 10MHz frequency. This is important for timing considerations in digital circuits.

6. Power Dissipation:

   • The maximum power dissipation is 100mW. Ensure adequate heat dissipation if the device is operating near its maximum power rating.

7. Handling Precautions:

   • The CD4023 is sensitive to electrostatic discharge (ESD). Use appropriate ESD protection measures during handling and installation.

8. Pin Configuration:

   • Refer to the pinout diagram provided in the datasheet to ensure correct connections. Commonly, pins 1, 2, and 13 are inputs, and pins 3, 4, and 11 are outputs for the three independent 3-input NAND gates.

9. Storage and Operating Temperature:

   • Store the device in a dry, cool environment. The operating temperature range is typically -40掳C to +85掳C.

10. Testing and Troubleshooting:

    • Before integrating the CD4023 into a circuit, test it on a breadboard to ensure it functions correctly. Use a multimeter to check for proper voltage levels and continuity.

By following these guidelines, you can effectively use the CD4023 in your digital circuit designs.

(For reference only)