Details

---

BUY CD74HCT257E https://www.utsource.net/itm/p/107350.html
LM9071 Low-Dropout System Voltage Regulator with Delayed Reset; Package: TO-220; No of Pins: 5

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VCC	Operating	2.0	-	6.0	V
Input Low Voltage	VIL	-	0.0	-	0.8	V
Input High Voltage	VIH	-	2.0	-	VCC	V
Output Low Voltage	VOL	IOL = 4 mA	0.0	-	0.4	V
Output High Voltage	VOH	IOH = -0.4 mA	VCC - 0.4	-	VCC	V
Input Leakage Current	IIL	VIN = 0 V, VCC = 5 V	-1.0	-	1.0	μA
Output Leakage Current	IOL	VOUT = 0 V, VCC = 5 V	-1.0	-	1.0	μA
Propagation Delay Time	tpd	VCC = 5 V, TA = 25°C	-	18	-	ns
Power Dissipation	PD	Maximum	-	-	100	mW

Instructions for Use:

1. Supply Voltage (V_CC):

   • Ensure the supply voltage is within the operating range of 2.0 V to 6.0 V.
   • Avoid exceeding the maximum voltage to prevent damage to the device.

2. Input Voltages (V_IL, V_IH):

   • Input low voltage (V_IL) should be between 0.0 V and 0.8 V.
   • Input high voltage (V_IH) should be between 2.0 V and V_CC.

3. Output Voltages (V_OL, V_OH):

   • Output low voltage (V_OL) should not exceed 0.4 V when sourcing 4 mA.
   • Output high voltage (V_OH) should be at least V_CC - 0.4 V when sinking -0.4 mA.

4. Leakage Currents (I_IL, I_OL):

   • Input leakage current (I_IL) and output leakage current (I_OL) should be within ±1.0 μA to avoid unwanted behavior.

5. Propagation Delay Time (t_pd):

   • The propagation delay time should be no more than 18 ns under typical conditions (V_CC = 5 V, T_A = 25°C).

6. Power Dissipation (P_D):

   • Ensure that the power dissipation does not exceed 100 mW to prevent overheating and potential damage to the device.

7. Handling and Storage:

   • Handle the device with care to avoid static discharge, which can damage sensitive components.
   • Store the device in a dry, cool environment to prevent moisture damage.

8. Circuit Design:

   • Use appropriate decoupling capacitors near the power supply pins to reduce noise and improve stability.
   • Ensure all inputs are properly terminated to prevent floating states, which can lead to undefined behavior.

9. Testing:

   • Test the device under specified conditions to ensure it meets the required performance parameters.
   • Use a reliable test setup to avoid introducing errors during testing.

(For reference only)