Details

---

BUY MAX452CPA https://www.utsource.net/itm/p/130968.html
CMOS Video Multiplexer/Amplifier

Parameter	Symbol	Conditions	Min	Typical	Max	Unit
Supply Voltage	VCC	Operating Range	2.7	-	5.5	V
Quiescent Current	IQ	VCC = 5V	-	30	-	μA
Input Offset Voltage	VOS	VCC = 5V	-1	0	1	mV
Input Bias Current	IB	VCC = 5V	-	100	-	nA
Input Resistance	RIN	VCC = 5V	10	-	-	GΩ
Output Short-Circuit	-	Continuous	-	-	-	-
Output Current (Sink)	IOL	VCC = 5V, VO = 0V	10	-	25	mA
Output Current (Source)	IOH	VCC = 5V, VO = VCC	-25	-	-10	mA
Operating Temperature	TA	Commercial	0	-	70	°C
Storage Temperature	TSTG	-	-65	-	150	°C

Instructions for Use:

1. Supply Voltage: The device operates within a supply voltage range of 2.7V to 5.5V. Ensure the power supply is stable and within this range.
2. Quiescent Current: The typical quiescent current is 30μA at 5V supply. This should be considered when designing low-power systems.
3. Input Offset Voltage: The input offset voltage is typically 0mV but can vary from -1mV to 1mV. This parameter affects the accuracy of the device in precision applications.
4. Input Bias Current: The typical input bias current is 100nA. This is important for high-impedance circuits.
5. Input Resistance: The input resistance is at least 10GΩ, making the device suitable for high-impedance sources.
6. Output Short-Circuit: The output can be short-circuited continuously without damage.
7. Output Current: The device can sink up to 25mA and source up to 10mA. Ensure the load does not exceed these limits.
8. Operating Temperature: The device is rated for operation from 0°C to 70°C in commercial environments.
9. Storage Temperature: The device can be stored between -65°C and 150°C.

Additional Notes:

• Always ensure proper decoupling capacitors are used near the power supply pins to minimize noise and improve stability.
• Refer to the datasheet for detailed information on pin configurations, package types, and specific application notes.

(For reference only)