Details

---

BUY SN74S373N https://www.utsource.net/itm/p/144630.html
OCTAL D-TYPE TRANSPARENT LATCHES AND EDGE-TRIGGERED FLIP-FLOPS

Parameter	Symbol	Conditions	Min	Typical	Max	Unit
Supply Voltage	VCC	Operating	4.75	-	5.25	V
Input Voltage (High)	VIH	-	2.0	-	5.25	V
Input Voltage (Low)	VIL	-	0	-	0.8	V
Output Voltage (High)	VOH	IOH = -0.4 mA	2.4	-	5.0	V
Output Voltage (Low)	VOL	IOL = 16 mA	0	-	0.5	V
Input Current (High)	IIH	VI = 5.25 V	-20	-	-	μA
Input Current (Low)	IIL	VI = 0 V	-1.0	-	-	mA
Output Current (High)	IOH	VO = 2.4 V	-0.4	-	-	mA
Output Current (Low)	IOL	VO = 0.5 V	-	-	16	mA
Storage Temperature	TSTG	-	-65	-	150	°C
Operating Temperature	TA	-	0	-	70	°C
Power Dissipation	PD	-	-	-	500	mW

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (V_CC) is within the specified range of 4.75V to 5.25V.
   • Connect the ground (GND) pin to a stable reference ground.

2. Input Signals:

   • Apply input voltages (V_I) such that they meet the minimum high (V_IH) and maximum low (V_IL) levels.
   • Be cautious of the input current limits (I_IH and I_IL) to avoid damaging the device.

3. Output Signals:

   • The output voltages (V_OH and V_OL) should be within the specified ranges when driving loads.
   • Ensure the output currents (I_OH and I_OL) do not exceed the maximum ratings.

4. Temperature Considerations:

   • Store the device within the storage temperature range (-65°C to 150°C).
   • Operate the device within the operating temperature range (0°C to 70°C) to ensure reliable performance.

5. Power Dissipation:

   • Do not exceed the maximum power dissipation (P_D) of 500 mW to prevent overheating and potential damage.

6. Handling:

   • Handle the device with care to avoid static discharge, which can damage the internal circuits.
   • Follow proper soldering techniques to ensure good electrical connections and avoid thermal shock.

7. Testing:

   • Before integrating the SN74S373N into a circuit, test it individually to verify its functionality and parameters.

(For reference only)