Details

---

BUY INA134PA https://www.utsource.net/itm/p/156240.html
AUDIO DIFFERENTIAL LINE RECEIVERS 0dB G = 1

Parameter	Symbol	Test Conditions	Min	Typ	Max	Unit
Supply Voltage	V_S		2.7		36	V
Input Offset Voltage	V_OS	T_A = 25°C	-0.1	0	0.1	mV
Input Bias Current	I_IB	T_A = 25°C	-1	0	1	nA
Common-Mode Rejection Ratio	CMRR	T_A = 25°C, f = 60Hz	84		100	dB
Power-Supply Rejection Ratio	PSRR	T_A = 25°C, f = 60Hz	84		100	dB
Output Impedance	Z_OUT	T_A = 25°C		20		Ω
Bandwidth	BW	G = +1, V_O = 2Vpp		1.1		MHz
Slew Rate	SR			0.5		V/μs

Instructions for Use:

1. Power Supply:

   • The INA134PA operates over a wide supply voltage range from 2.7V to 36V. Ensure the power supply is within this range and stable.

2. Input Signals:

   • The input bias current is very low, making it suitable for high impedance sources. Keep input signals within the common-mode input voltage range to ensure accurate operation.

3. Common-Mode Rejection:

   • The device offers excellent common-mode rejection (up to 100dB at 25°C), which helps in rejecting noise common to both inputs.

4. Output Configuration:

   • The output impedance is relatively low (20Ω typical), allowing the device to drive moderate loads directly.

5. Frequency Response:

   • For applications requiring high-frequency response, note the bandwidth and slew rate specifications. Adjust gain settings if necessary to match application requirements.

6. Operating Temperature:

   • Ensure that the ambient temperature remains within the specified operational limits to maintain performance parameters.

7. Handling Precautions:

   • The device is sensitive to electrostatic discharge (ESD). Handle with appropriate ESD precautions to avoid damage.

8. Mounting:

   • Properly mount the device on a PCB with adequate thermal management considerations, especially in high-power applications.

For detailed application circuits and further information, refer to the full datasheet provided by the manufacturer.

(For reference only)