Details

---

BUY SKM100GAR123D https://www.utsource.net/itm/p/199892.html
SEMITRANS IGBT Modules New Range

Parameter	Description	Value	Unit
Part Number	Component Identifier	SKM100GAR123D	-
Type	Device Type	IGBT Module	-
Package	Package Type	SEMITOP M	-
Collector-Emitter Voltage (Vce)	Maximum Collector-Emitter Voltage	1200	V
Collector Current (Ic)	Continuous Collector Current at Tc = 25°C	100	A
Collector Current (Ic)	Continuous Collector Current at Tc = 100°C	70	A
Pulse Collector Current (Icm)	Non-Repetitive Peak Collector Current (10 ms, 1 cycle)	200	A
Gate-Emitter Voltage (Vge)	Maximum Gate-Emitter Voltage	±20	V
Power Dissipation (Ptot)	Total Power Dissipation at Tc = 25°C	1400	W
Power Dissipation (Ptot)	Total Power Dissipation at Tc = 100°C	980	W
Thermal Resistance (Rth(j-c))	Thermal Resistance, Junction to Case	0.16	K/W
Operating Temperature Range (Tj)	Junction Operating Temperature Range	-40 to 150	°C
Storage Temperature Range (Tstg)	Storage Temperature Range	-40 to 150	°C
Humidity	Relative Humidity	20% to 90% (non-condensing)	%

Instructions for Use

1. Handling and Storage:

   • Store the module in a dry, cool place with relative humidity between 20% and 90%.
   • Avoid exposure to extreme temperatures and direct sunlight.
   • Handle the module with care to avoid mechanical damage.

2. Mounting:

   • Ensure the mounting surface is flat and clean.
   • Apply thermal grease or a thermal pad to improve heat dissipation.
   • Tighten the mounting screws to the recommended torque (refer to the datasheet for specific values).

3. Electrical Connections:

   • Connect the collector, emitter, and gate terminals according to the circuit diagram.
   • Use high-quality, low-inductance wires for connections.
   • Ensure all connections are secure and free from corrosion.

4. Operation:

   • Operate the module within the specified voltage and current limits.
   • Monitor the junction temperature to ensure it does not exceed the maximum operating temperature.
   • Use appropriate cooling solutions (e.g., heatsinks, fans) to maintain optimal operating conditions.

5. Testing:

   • Perform initial testing under controlled conditions to verify proper operation.
   • Use a suitable test setup to measure key parameters such as Vce, Ic, and Vge.
   • Refer to the datasheet for detailed testing procedures and safety guidelines.

6. Safety:

   • Follow all safety guidelines and precautions when handling high-voltage and high-current circuits.
   • Use protective equipment such as gloves and safety glasses.
   • Ensure the module is properly insulated and grounded to prevent electrical shock.

(For reference only)