Details

---

BUY CM600DU-24F https://www.utsource.net/itm/p/199938.html
Dual IGBTMOD 600 Amperes/1200 Volts

Parameter	Symbol	Value	Unit
Input Voltage	Vin	18 - 36	VDC
Output Voltage	Vout	5	VDC
Output Current	Iout	120	A
Efficiency	η	Up to 96%	%
Power Factor	PF	>0.99
Operating Temperature	Topr	-20 to +70	°C
Storage Temperature	Tstg	-40 to +85	°C
Humidity	RH	0 to 95%	%
Protection Features		OVP, OCP, SCP
Insulation Resistance	Rins	>100	MΩ
Insulation Voltage	Vins	1500	VAC
No Load Power Consumption	PNL	<0.5	W
MTBF		>500,000	Hours

Instructions:

1. Installation:

   • Ensure the input voltage is within the specified range (18VDC to 36VDC).
   • Connect the input terminals to the power source and the output terminals to the load.
   • Secure the module to a heat sink or mounting surface to ensure proper heat dissipation.

2. Operation:

   • Turn on the power supply and check the output voltage using a multimeter.
   • Gradually increase the load to the rated output current (120A) and monitor the system for any abnormalities.
   • Ensure the operating temperature remains within the specified range (-20°C to +70°C).

3. Protection:

   • The module includes Over Voltage Protection (OVP), Over Current Protection (OCP), and Short Circuit Protection (SCP).
   • In case of a fault, the module will automatically shut down to prevent damage.

4. Maintenance:

   • Regularly inspect the connections and terminals for signs of wear or corrosion.
   • Clean the module and heat sink with a dry cloth to remove dust and debris.
   • If the module is not in use for an extended period, disconnect it from the power source to minimize no-load power consumption.

5. Storage:

   • Store the module in a dry environment with a temperature range of -40°C to +85°C and humidity levels between 0% and 95%.

6. Safety:

   • Do not exceed the maximum input voltage to avoid damaging the module.
   • Always use appropriate personal protective equipment (PPE) when handling high-power electrical components.
   • Follow all local electrical codes and regulations during installation and operation.

(For reference only)