Details

---

BUY MG50J6EL1 https://www.utsource.net/itm/p/200147.html
Catalog Scans - Shortform Datasheet

Parameter	Symbol	Min	Typ	Max	Unit	Notes
Input Voltage	V_IN	85	-	264	V AC	-
Output Voltage	V_OUT	5	-	5	V DC	-
Output Current	I_OUT	-	0.6	0.6	A	-
Efficiency	η	-	75	-	%	-
No-Load Power Consumption	P_NL	-	0.1	-	W	-
Operating Temperature	T_OP	-40	-	85	°C	-
Storage Temperature	T_ST	-40	-	85	°C	-
Humidity	H_RH	10	-	90	% RH	Non-condensing
Insulation Resistance	R_ISO	100	-	-	MΩ	At 500V DC, 25°C
Insulation Voltage	V_ISO	-	-	4000	V AC	1 minute, 50/60 Hz
MTBF	-	-	300	-	kHrs	-

Instructions:

1. Installation:

   • Ensure that the input voltage is within the specified range (85V AC to 264V AC).
   • Connect the output terminals to the load, ensuring the polarity is correct.
   • Secure the power supply in a well-ventilated area to prevent overheating.

2. Operation:

   • The power supply is designed to operate within the temperature range of -40°C to 85°C.
   • Avoid operating the power supply in environments with high humidity to prevent condensation and potential damage.

3. Safety:

   • Do not exceed the maximum output current of 0.6A.
   • Ensure that the insulation resistance is at least 100MΩ at 500V DC.
   • The insulation voltage is rated for 4000V AC for 1 minute at 50/60 Hz.

4. Maintenance:

   • Regularly inspect the power supply for any signs of damage or wear.
   • If the power supply is not used for an extended period, store it in a dry environment within the storage temperature range (-40°C to 85°C).

5. Troubleshooting:

   • If the power supply fails to start, check the input voltage and connections.
   • If the output voltage is unstable, ensure the load is within the specified range and there are no short circuits.

6. Disposal:

   • Follow local regulations for the disposal of electronic components.
   • Recycle the power supply through appropriate channels to minimize environmental impact.

(For reference only)