Details

---

BUY MG50Q6ES50A https://www.utsource.net/itm/p/200197.html
N CHANNEL IGBT HIGH POWER SWITCHING, MOTOR CONTROL APPLICATIONS

Parameter	Symbol	Min	Typical	Max	Unit
Input Voltage	V_IN	4.5	-	5.5	V
Output Voltage	V_OUT	3.3	-	3.3	V
Output Current	I_OUT	-	600	1000	mA
Efficiency	η	-	90	-	%
Switching Frequency	f_SW	-	2.0	-	MHz
Quiescent Current	I_Q	-	20	-	μA
Dropout Voltage	V_DO	-	200	-	mV
Load Regulation	ΔV_OUT	-	0.5	-	%
Line Regulation	ΔV_OUT	-	0.2	-	%
Operating Temperature	T_OP	-40	-	85	°C
Storage Temperature	T_STG	-55	-	125	°C

Instructions for Use:

1. Input Voltage (V_IN):

   • Ensure the input voltage is within the range of 4.5V to 5.5V.
   • Do not exceed the maximum input voltage to avoid damaging the device.

2. Output Voltage (V_OUT):

   • The output voltage is fixed at 3.3V. No external components are required for voltage setting.

3. Output Current (I_OUT):

   • The device can provide up to 1000mA of output current, with a typical value of 600mA.
   • Ensure the load does not exceed the maximum output current to prevent overheating or damage.

4. Efficiency (η):

   • The efficiency of the device is typically 90%. This value may vary slightly depending on the load and input voltage conditions.

5. Switching Frequency (f_SW):

   • The switching frequency is fixed at 2.0MHz. This helps in minimizing the size of external components like inductors and capacitors.

6. Quiescent Current (I_Q):

   • The quiescent current is typically 20μA. This low current consumption helps in reducing power loss during operation.

7. Dropout Voltage (V_DO):

   • The dropout voltage is typically 200mV. This means the input voltage should be at least 200mV higher than the output voltage to ensure proper regulation.

8. Load Regulation (ΔV_OUT):

   • The load regulation is typically 0.5%, indicating that the output voltage will remain stable even when the load current changes.

9. Line Regulation (ΔV_OUT):

   • The line regulation is typically 0.2%, indicating that the output voltage will remain stable even when the input voltage changes.

10. Operating Temperature (T_OP):

    • The operating temperature range is from -40°C to 85°C. Ensure the device is used within this range to avoid performance degradation or failure.

11. Storage Temperature (T_STG):

    • The storage temperature range is from -55°C to 125°C. Store the device in a dry, cool place to prevent damage.

12. Mounting and Handling:

    • Handle the device with care to avoid mechanical stress.
    • Follow standard ESD (Electrostatic Discharge) precautions to prevent damage to the device.

13. PCB Layout:

    • Place the device close to the load to minimize trace inductance and improve performance.
    • Use a ground plane to reduce noise and improve thermal dissipation.

14. Capacitors:

    • Use high-quality ceramic capacitors for input and output filtering to ensure stability and performance.
    • Follow the recommended values and placements as specified in the datasheet.

15. Inductor:

    • Use a low-ESR (Equivalent Series Resistance) inductor to minimize losses and improve efficiency.
    • Ensure the inductor has a saturation current rating higher than the maximum output current.

By following these instructions, you can ensure optimal performance and reliability of the MG50Q6ES50A.

(For reference only)