Details

---

BUY HCF40110BE https://www.utsource.net/itm/p/216687.html
DECADE UP-DOWN COUNTER/DECODER/LATCH/DRIVER

Parameter	Description	Min	Typ	Max	Unit
Supply Voltage (VDD)	Operating supply voltage range	3.0	-	15.0	V
Input Voltage (VIH)	High-level input voltage	2.0	-	VDD	V
Input Voltage (VIL)	Low-level input voltage	0	-	0.8	V
Output Voltage (VOH)	High-level output voltage	-	-	VDD - 0.5	V
Output Voltage (VOL)	Low-level output voltage	0	-	0.5	V
Input Current (IIH)	High-level input current	-	1.0	-	渭A
Input Current (IIL)	Low-level input current	-1.0	-	-	渭A
Output Current (IOH)	High-level output current	-	-	-5.0	mA
Output Current (IOL)	Low-level output current	-5.0	-	-	mA
Propagation Delay Time (tpd)	Propagation delay time from input to output	35	-	125	ns
Power Consumption	Maximum power dissipation	-	-	150	mW

Instructions for Using HCF40110BE

1. Supply Voltage:

   • Ensure the supply voltage (V_DD) is within the range of 3.0V to 15.0V.
   • Connect V_DD to the positive supply and V_SS (GND) to the ground.

2. Input Levels:

   • For high-level inputs, ensure the voltage is between 2.0V and V_DD.
   • For low-level inputs, ensure the voltage is between 0V and 0.8V.

3. Output Levels:

   • The high-level output voltage (V_OH) will be V_DD - 0.5V.
   • The low-level output voltage (V_OL) will be 0.5V or less.

4. Current Ratings:

   • The high-level input current (I_IH) should not exceed 1.0渭A.
   • The low-level input current (I_IL) should not be less than -1.0渭A.
   • The high-level output current (I_OH) should not exceed -5.0mA.
   • The low-level output current (I_OL) should not exceed 5.0mA.

5. Propagation Delay:

   • The propagation delay time (t_pd) from input to output is typically between 35ns and 125ns.

6. Power Consumption:

   • The maximum power dissipation should not exceed 150mW.

7. Handling and Storage:

   • Handle the device with care to avoid static damage.
   • Store in a dry environment to prevent moisture damage.

8. Layout and PCB Design:

   • Use proper decoupling capacitors near the power pins to reduce noise.
   • Keep signal traces as short as possible to minimize signal degradation.

9. Testing:

   • Test the device under specified operating conditions to ensure reliable performance.
   • Use appropriate test equipment to measure input and output levels accurately.

(For reference only)