Details

---

BUY AD636JD https://www.utsource.net/itm/p/226897.html
DIODE SCHOTTKY SINGLE 50V 333mW 0.41V-vf 15mA-IFM 1mA-IF 0.2uA-IR SOD-123 3K/REEL

Parameter	Symbol	Min	Typ	Max	Unit	Notes
Supply Voltage	VCC	4.5	-	18	V	-
Quiescent Current	IQ	-	2	3	mA	-
Input Voltage Range	VIN	0	-	VCC-1.5	V	-
Output Voltage Range	VOUT	0.01	-	VCC-0.01	V	-
RMS Input Voltage Range	VRMS	0	-	10	V	-
Output Accuracy	-	-	±0.1	±1.0	%	-
Linearity Error	-	-	±0.01	±0.1	%	-
Temperature Range	TA	-40	-	85	°C	-
Operating Frequency Range	fIN	0	-	20	kHz	-

Instructions for Using AD636JD

1. Power Supply:

   • Connect the positive supply voltage (V_CC) to pin 8 and ground (GND) to pin 4.
   • Ensure the supply voltage is within the range of 4.5V to 18V.

2. Input Signal:

   • Connect the input signal to pins 5 (non-inverting input) and 6 (inverting input).
   • The input voltage should be within the range of 0V to V_CC - 1.5V.
   • For AC signals, ensure the RMS voltage does not exceed 10V.

3. Output Signal:

   • The output signal is available at pin 7.
   • The output voltage range is from 0.01V to V_CC - 0.01V.
   • The output is a DC voltage proportional to the RMS value of the input signal.

4. Biasing and Decoupling:

   • Place a 0.1μF capacitor between V_CC and GND close to the device to filter out noise.
   • If the input signal is AC-coupled, use appropriate biasing techniques to ensure the input remains within the valid range.

5. Temperature Considerations:

   • The device operates over a temperature range of -40°C to 85°C.
   • Ensure the operating environment is within this range to maintain accuracy and reliability.

6. Frequency Response:

   • The device is designed to handle input frequencies up to 20kHz.
   • For higher frequencies, consider the effects on accuracy and linearity.

7. Accuracy and Linearity:

   • The output accuracy is typically ±0.1% and can vary up to ±1.0%.
   • Linearity error is typically ±0.01% and can vary up to ±0.1%.

8. Handling and Storage:

   • Handle the device with care to avoid static damage.
   • Store in a dry, cool place away from direct sunlight and extreme temperatures.

By following these guidelines, you can ensure optimal performance and reliability of the AD636JD.

(For reference only)