Details

---

BUY MAX4547EEE https://www.utsource.net/itm/p/237902.html
Quad/Dual, Low-Voltage, Bidirectional RF/Video Switches

Parameter	Symbol	Min	Typical	Max	Unit	Description
Supply Voltage	VCC	2.7	-	5.5	V	Operating supply voltage
Quiescent Current	IQ	-	10	-	μA	Supply current at VCC = 5V
Input Offset Voltage	VOS	-	1.5	-	mV	Maximum input offset voltage
Input Bias Current	IB	-	10	-	nA	Maximum input bias current
Input Voltage Range	VI	0	-	VCC	V	Input common-mode voltage range
Output Voltage Swing	VOUT	0	-	VCC - 0.2	V	Output voltage swing (at 100μA load)
Slew Rate	SR	-	0.3	-	V/μs	Slew rate
Bandwidth	fBW	-	1.5	-	MHz	Unity gain bandwidth
Gain Bandwidth Product	GBP	-	2.5	-	MHz	Gain-bandwidth product
CMRR	CMRR	-	85	-	dB	Common-mode rejection ratio
PSRR	PSRR	-	85	-	dB	Power supply rejection ratio
Output Short-Circuit	-	-	-	-	-	Output short-circuit protection
Operating Temperature	TA	-40	-	85	°C	Ambient operating temperature range
Storage Temperature	TSTG	-65	-	150	°C	Storage temperature range

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage is within the specified range (2.7V to 5.5V).
   • Connect the positive supply to V_CC and the negative supply to GND.

2. Input Connections:

   • Connect the input signals to the IN+ and IN- pins.
   • Ensure the input voltages do not exceed the supply voltage range.

3. Output Connections:

   • Connect the output to the desired load.
   • The output can swing from 0V to V_CC - 0.2V under a 100μA load.

4. Biasing and Stability:

   • Use appropriate external components (e.g., capacitors) to ensure stability and proper biasing.
   • For high-frequency applications, consider adding bypass capacitors close to the power pins.

5. Thermal Management:

   • Ensure adequate heat dissipation if operating at high temperatures or with high power dissipation.
   • Follow the recommended PCB layout guidelines for optimal thermal performance.

6. Handling Precautions:

   • Handle the device with care to avoid static damage.
   • Store the device in a dry environment within the specified storage temperature range.

7. Testing and Verification:

   • Verify the supply voltage and input signals before powering the device.
   • Monitor the output and ensure it meets the expected performance specifications.

For more detailed information, refer to the datasheet provided by Maxim Integrated.

(For reference only)