Details

---

BUY CM30AD46-12H https://www.utsource.net/itm/p/279590.html
MEDIUM POWER SWITCHING USE FLAT BASE, INSULATED TYPE

Parameter	Description	Value
Part Number	Full part number	CM30AD46-12H
Type	Type of component	Relay
Coil Voltage	Nominal voltage required to energize the relay coil	12V DC
Coil Power Consumption	Power consumed by the coil when energized	0.3W
Contact Form	Configuration of the relay contacts	SPDT (Single Pole, Double Throw)
Contact Rating	Maximum current and voltage that can be switched by the contacts	10A at 250V AC
Insulation Resistance	Minimum resistance between insulated parts	100MΩ at 500V DC
Dielectric Strength	Minimum voltage that can be applied without breakdown	2500V AC for 1 minute
Operating Temperature	Temperature range within which the relay will operate reliably	-40°C to +85°C
Storage Temperature	Temperature range within which the relay can be stored without damage	-55°C to +125°C
Mechanical Life	Number of operations before mechanical failure	10 million operations
Electrical Life	Number of operations before electrical failure under rated load	100,000 operations
Weight	Weight of the component	20g

Instructions:

1. Installation: Ensure the relay is mounted on a stable surface with adequate ventilation to prevent overheating.
2. Connection: Connect the coil terminals to a 12V DC power source. Connect the contact terminals according to your circuit requirements (common, normally open, normally closed).
3. Operation: When the coil is energized, the contacts will switch from their resting state to the activated state, completing or breaking the circuit as designed.
4. Maintenance: Regularly inspect connections and mounting to ensure reliability. Avoid exposure to moisture and corrosive environments.
5. Handling: Handle with care to avoid physical damage. Use appropriate tools when installing or removing the relay.

(For reference only)