Details

---

BUY MG150J2YS45 https://www.utsource.net/itm/p/280244.html
Silicon N channel IGBTN

Parameter	Description	Value
Part Number	Full part number	MG150J2YS45
Type	Type of component	MOSFET
Package	Package type	TO-220
Polarity	Polarity of the MOSFET	N-Channel
VDS	Drain-to-Source Voltage	150V
VGS	Gate-to-Source Voltage	±20V
ID	Continuous Drain Current	20A
RDS(on)	On-State Resistance (at VGS = 10V)	45mΩ
Power Dissipation	Maximum Power Dissipation (at TC = 25°C)	150W
Operating Temperature	Junction Temperature Range	-55°C to +150°C
Storage Temperature	Storage Temperature Range	-65°C to +150°C
Gate Charge	Total Gate Charge (QG)	130nC
Input Capacitance	Input Capacitance (Ciss)	1500pF
Output Capacitance	Output Capacitance (Coss)	450pF
Reverse Transfer Capacitance	Reverse Transfer Capacitance (Crss)	250pF
Thermal Resistance	Junction-to-Case Thermal Resistance (RθJC)	1.5°C/W

Instructions for Use:

1. Handling:

   • Handle with care to avoid damage to the leads and body.
   • Use appropriate ESD protection to prevent damage from static electricity.

2. Mounting:

   • Ensure proper heat sinking to manage thermal dissipation, especially when operating at high power levels.
   • Use a suitable heatsink compound to improve thermal conductivity between the component and the heatsink.

3. Soldering:

   • Preheat the PCB to reduce thermal shock.
   • Solder within the recommended temperature range (260°C for no more than 10 seconds).
   • Allow the component to cool naturally after soldering.

4. Electrical Connections:

   • Connect the gate to the control circuit with minimal lead length to reduce parasitic inductance.
   • Ensure the source is properly grounded to maintain stability.
   • Use a gate resistor to control switching speed and reduce electromagnetic interference (EMI).

5. Operation:

   • Operate within the specified voltage and current limits to avoid damage.
   • Monitor the junction temperature to ensure it remains within safe operating limits.
   • Use appropriate snubber circuits if necessary to protect against voltage spikes during switching.

6. Storage:

   • Store in a dry, cool place away from direct sunlight and sources of heat.
   • Keep the components in their original packaging until ready for use to protect against moisture and physical damage.

(For reference only)