Details

---

BUY PM150DKA060 https://www.utsource.net/itm/p/280733.html
TRANSISTOR | IGBT POWER MODULE | HALF BRIDGE | 600V VBRCES | 150A IC

Parameter	Symbol	Min	Typ	Max	Unit
Input Voltage	VIN	277	-	480	V
Output Voltage	VOUT	-	24	-	V
Output Current	IOUT	-	6.25	-	A
Efficiency	η	-	94	-	%
Power Factor	PF	-	0.95	-	-
Operating Temperature	TOP	-40	-	85	°C
Storage Temperature	TSTG	-40	-	125	°C
Humidity	RH	-	95	-	% (non-condensing)
Protection Features	-	Overvoltage, Overcurrent, Short-circuit, Overtemperature	-	-	-

Instructions for Use:

1. Installation:

   • Ensure that the PM150DKA060 is installed in a well-ventilated area to prevent overheating.
   • Mount the module on a flat, stable surface with appropriate cooling measures if necessary.

2. Input Connection:

   • Connect the input terminals to a power source within the specified voltage range (277V to 480V).
   • Verify the polarity before connecting to avoid damage.

3. Output Connection:

   • Connect the output terminals to the load requiring 24V DC power.
   • Ensure the load does not exceed the maximum output current of 6.25A.

4. Protection Features:

   • The module includes overvoltage, overcurrent, short-circuit, and overtemperature protection.
   • In the event of a fault, the module will automatically shut down to prevent damage.

5. Operating Environment:

   • Operate the module within the specified temperature range (-40°C to 85°C) and humidity levels (up to 95% non-condensing).

6. Maintenance:

   • Regularly inspect the module for signs of wear or damage.
   • Clean the module with a dry, soft cloth to remove dust and debris.

7. Troubleshooting:

   • If the module fails to start or operates abnormally, check the input voltage, connections, and load.
   • Refer to the user manual for detailed troubleshooting steps and contact the manufacturer for further assistance if needed.

(For reference only)