Details

---

BUY MG15H1AL1 https://www.utsource.net/itm/p/281551.html
Catalog Scans - Shortform Datasheet

Parameter	Symbol	Min	Typ	Max	Unit	Description
Supply Voltage	Vcc	4.5	5	5.5	V	Operating voltage range
Supply Current	Icc	-	20	-	mA	Typical supply current
Output Current	Iout	-	100	-	mA	Maximum output current per channel
Output Voltage Drop	Vsat	-	0.3	-	V	Saturation voltage (Vce(sat)) at Iout = 100mA
Input Voltage (High)	VIH	2	-	5.5	V	Minimum input voltage for logic high
Input Voltage (Low)	VIL	0	-	0.8	V	Maximum input voltage for logic low
Input Current (High)	IIH	-	1	-	μA	Input current at VIH = 5V
Input Current (Low)	IIL	-	1	-	μA	Input current at VIL = 0V
Operating Temperature	Topr	-40	-	85	°C	Operating temperature range
Storage Temperature	Tstg	-65	-	150	°C	Storage temperature range

Instructions for Using MG15H1AL1

1. Power Supply:

   • Ensure the supply voltage is within the range of 4.5V to 5.5V.
   • Connect the Vcc pin to the positive terminal of the power supply and GND to the ground.

2. Input Signals:

   • Apply logic high (VIH ≥ 2V) to activate the output.
   • Apply logic low (VIL ≤ 0.8V) to deactivate the output.
   • Ensure input currents do not exceed 1μA for both high and low states.

3. Output Configuration:

   • The output can source up to 100mA of current.
   • The output voltage drop (Vsat) should be considered when designing the load circuit, as it is typically around 0.3V at 100mA.

4. Thermal Management:

   • Operate the device within the temperature range of -40°C to 85°C.
   • Store the device in an environment between -65°C and 150°C.

5. Handling and Storage:

   • Handle the device with care to avoid static damage.
   • Store the device in a dry, cool place to prevent moisture damage.

6. Schematic Integration:

   • Connect the output pins to the load, ensuring the load does not exceed the maximum current rating.
   • Use appropriate decoupling capacitors near the power supply pins to stabilize the supply voltage.

7. Testing:

   • Test the device under typical operating conditions to ensure proper functionality.
   • Verify that the output behaves correctly for both high and low input signals.

8. Safety:

   • Follow all safety guidelines and regulations when handling and using the device.
   • Do not exceed the maximum ratings specified in the parameter table to avoid damage to the device.

(For reference only)