Details

---

BUY TL16C552APN https://www.utsource.net/itm/p/323724.html
DUAL ASYNCHRONOUS COMMUNICATIONS ELEMENT WITH FIFO

Parameter	Description	Min	Typ	Max	Unit
Supply Voltage (VCC)	Operating voltage range	4.75	-	5.25	V
Operating Temperature	Temperature range for operation	-40	-	85	°C
Storage Temperature	Temperature range for storage	-65	-	150	°C
Data Rate	Maximum data rate per channel	-	1	-	Mbps
Input Voltage (VIH)	High-level input voltage	2.0	-	5.25	V
Input Voltage (VIL)	Low-level input voltage	0	-	0.8	V
Output Voltage (VOH)	High-level output voltage	2.4	-	5.0	V
Output Voltage (VOL)	Low-level output voltage	0	-	0.4	V
Power Consumption	Typical power consumption at 5V	-	100	-	mW
Standby Current	Current consumption in standby mode	-	10	-	μA

Instructions for Using the TL16C552APN

1. Power Supply:

   • Ensure that the supply voltage (VCC) is within the specified range of 4.75V to 5.25V.
   • Connect the ground (GND) pin to a stable ground reference.

2. Temperature Considerations:

   • Operate the device within the temperature range of -40°C to 85°C.
   • Store the device in a temperature range of -65°C to 150°C.

3. Data Rate:

   • The maximum data rate per channel is 1 Mbps. Ensure that the baud rate settings of the connected devices are compatible with this limit.

4. Input and Output Levels:

   • High-level input voltage (VIH) should be between 2.0V and 5.25V.
   • Low-level input voltage (VIL) should be between 0V and 0.8V.
   • High-level output voltage (VOH) will be between 2.4V and 5.0V.
   • Low-level output voltage (VOL) will be between 0V and 0.4V.

5. Power Consumption:

   • The typical power consumption at 5V is 100 mW. Ensure that the power supply can handle this load.

6. Standby Mode:

   • In standby mode, the current consumption is typically 10 μA. Use the appropriate control signals to put the device into standby mode when not in use.

7. Pin Configuration:

   • Refer to the datasheet for the specific pin configuration and connections.
   • Ensure all necessary pins are connected correctly to avoid damage to the device.

8. Signal Integrity:

   • Use proper signal integrity practices, such as using decoupling capacitors near the power pins and ensuring clean signal traces.

9. Software Configuration:

   • Configure the device using the appropriate register settings as specified in the datasheet.
   • Use the control lines (e.g., CS, RD, WR) to manage read and write operations.

10. Testing and Validation:

    • Test the device in a controlled environment to ensure it meets the required specifications.
    • Validate the communication with other devices to ensure reliable data transfer.

For detailed information, refer to the official Texas Instruments TL16C552APN datasheet.

(For reference only)