Details

---

BUY FD300R12KE3 https://www.utsource.net/itm/p/330313.html
Technische Information / technical information

Parameter	Symbol	Test Conditions	Min	Typ	Max	Unit
Breakdown Voltage	V(BR)DSS	ID = 250 μA	-	1200	-	V
Forward Voltage	VF	IF = 2 A, Tj = 25°C	-	2.0	-	V
Reverse Recovery Time	trr	IF = IR = 2 A, Tj = 25°C	-	45	-	ns
Continuous Drain Current	ID	VGS = 0 V, Tc = 25°C	-	300	-	mA
Gate-Source Voltage	VGS(th)	ID = 1 mA, Tj = 25°C	1.0	2.0	3.0	V
Power Dissipation	PD	Tc = 25°C	-	-	1.8	W
Junction Temperature	Tj	-	-	-	175	°C

Instructions for Use:

1. Mounting and Handling:

   • Ensure that the device is handled with care to avoid mechanical damage.
   • Use appropriate mounting techniques to ensure good thermal contact with the heatsink.

2. Electrical Connections:

   • Connect the drain (D), source (S), and gate (G) terminals correctly.
   • Use short and thick wires to minimize inductance and resistance.

3. Thermal Management:

   • Ensure adequate cooling to keep the junction temperature within the specified limits.
   • Use a heatsink with sufficient thermal capacity and thermal interface material (TIM) for optimal heat dissipation.

4. Biasing and Drive:

   • Apply the correct gate-source voltage (VGS) to turn the device on and off.
   • Ensure the gate drive circuitry can provide the necessary current to charge and discharge the gate capacitance quickly.

5. Overvoltage Protection:

   • Implement overvoltage protection circuits to prevent damage from voltage transients.
   • Consider using snubber circuits to suppress voltage spikes.

6. Storage and Operating Conditions:

   • Store the device in a dry, cool place to prevent moisture damage.
   • Operate the device within the specified temperature and voltage ranges to ensure reliable performance.

7. Testing:

   • Use a suitable test setup to verify the device parameters before installation.
   • Follow the test conditions specified in the parameter table for accurate measurements.

8. Safety Precautions:

   • Always follow safety guidelines when handling high-voltage and high-power components.
   • Use appropriate personal protective equipment (PPE) when working with live circuits.

(For reference only)