Details

---

BUY MAX516ACNG https://www.utsource.net/itm/p/350644.html
Quad Comparator with Programmable Threshold

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VCC	Operating	4.75	-	5.25	V
Output Voltage Range	VOUT	-	0	-	VCC	V
Output Current	IOUT	Continuous	-	10	-	mA
Power Dissipation	PD	Continuous	-	-	150	mW
Operating Temperature	TOP	Commercial	0	-	70	°C
Storage Temperature	TSTG	-	-40	-	85	°C
Input Resistance	RIN	-	-	10	-	kΩ
Output Resistance	ROUT	-	-	1	-	Ω
Line Regulation	-	1% change in VCC	-	0.01	-	%
Load Regulation	-	10 mA load change	-	0.01	-	%
Settling Time (10% to 90%)	tS	10 mA load	-	10	-	μs

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage is within the specified range (4.75V to 5.25V).
   • Use a stable power source to avoid fluctuations that can affect performance.

2. Output Configuration:

   • The output voltage can be set using external resistors or through digital control, depending on the specific model.
   • Ensure the load current does not exceed 10 mA continuously.

3. Thermal Management:

   • The device can dissipate up to 150 mW of power continuously.
   • For higher power dissipation, consider adding a heat sink or ensuring adequate airflow.

4. Temperature Range:

   • Operate the device within the commercial temperature range (0°C to 70°C) for optimal performance.
   • Store the device in a temperature range between -40°C and 85°C.

5. Input and Output Resistance:

   • The input resistance is typically 10 kΩ, and the output resistance is typically 1 Ω.
   • These values should be considered when designing the circuit to ensure proper signal integrity.

6. Regulation:

   • The line regulation is 0.01%, meaning the output voltage will change by only 0.01% for a 1% change in supply voltage.
   • The load regulation is also 0.01%, indicating the output voltage will change by only 0.01% for a 10 mA load change.

7. Settling Time:

   • The settling time from 10% to 90% of the final output voltage is typically 10 μs under a 10 mA load.

8. Handling and Storage:

   • Handle the device with care to avoid static damage.
   • Store in a dry, cool place to prevent moisture damage.

For more detailed information, refer to the datasheet provided by Maxim Integrated.

(For reference only)