Details

---

BUY BSM75GB100DN1 https://www.utsource.net/itm/p/386205.html
IGBT Power Module Solderable Power module 3-phase full-bridge Including fast free-wheel diodes

Parameter	Symbol	Min	Typ	Max	Unit	Condition
Blocking Voltage (Collector-Emitter)	VCEO	-	1000	-	V	IC = 25 mA, Tj = 25°C
Blocking Voltage (Collector-Base)	VCBO	-	1000	-	V	IC = 25 mA, Tj = 25°C
Blocking Voltage (Emitter-Base)	VEBO	-	8	-	V	IE = 100 μA, Tj = 25°C
Continuous Collector Current	IC	-	75	-	A	TC = 25°C
Continuous Collector Current (at Tj = 100°C)	IC(Tj)	-	45	-	A	Tj = 100°C
Power Dissipation	PTOT	-	1000	-	W	TC = 25°C, Rth(j-c) = 0.6 K/W
Junction to Case Thermal Resistance	Rth(j-c)	-	0.6	-	K/W	-
Junction to Ambient Thermal Resistance	Rth(j-a)	-	30	-	K/W	-
Storage Temperature Range	Tstg	-55	-	150	°C	-
Operating Junction Temperature Range	Tj(op)	-55	-	150	°C	-

Instructions for Use:

1. Mounting and Handling:

   • Ensure proper heat sinking to manage the thermal resistance and maintain the junction temperature within the specified range.
   • Handle the device with care to avoid mechanical stress, especially on the leads.

2. Electrical Connections:

   • Connect the collector, base, and emitter terminals correctly to avoid damage.
   • Use appropriate wire gauges and connectors to handle the current ratings.

3. Thermal Management:

   • Ensure adequate cooling, such as forced air or liquid cooling, to keep the junction temperature below the maximum limit.
   • Use thermal paste between the heat sink and the device to improve thermal conductivity.

4. Overvoltage Protection:

   • Implement overvoltage protection circuits to prevent damage from transient voltages exceeding the blocking voltage ratings.

5. Current Limiting:

   • Use current-limiting resistors or other protective measures to ensure the continuous collector current does not exceed the rated value.

6. Storage:

   • Store the device in a dry, cool place within the specified storage temperature range to prevent degradation.

7. Testing:

   • Perform regular testing and inspection to ensure the device is functioning within its specified parameters.

8. Compliance:

   • Ensure that the application complies with relevant safety and regulatory standards.

(For reference only)