Details

---

BUY QM10KD1-HB https://www.utsource.net/itm/p/386725.html

Parameter	Description	Value
Part Number	Component identifier	QM10KD1-HB
Type	Type of component	Relay
Coil Voltage	Operating voltage for the relay coil	12V DC
Contact Form	Configuration of contacts	SPDT (Single Pole, Double Throw)
Contact Rating	Maximum current and voltage the contacts can handle	10A, 250V AC
**Insulation Resistance	Resistance between non-connected points	>100MΩ at 500V DC
Dielectric Strength	Voltage required to cause dielectric breakdown	2500V AC for 1 minute
Mechanical Life	Expected number of operations before failure	10 million cycles
Electrical Life	Expected number of operations under load before failure	100,000 cycles
**Operating Temperature	Range of temperatures where the relay will operate reliably	-40°C to +85°C
Storage Temperature	Range of temperatures suitable for storage	-40°C to +85°C
Weight	Weight of the component	25g

Instructions:

1. Installation: Ensure the relay is installed in a location that does not exceed its operating temperature range.
2. Wiring: Connect the coil terminals to the appropriate control circuit voltage. Wire the common (C), normally open (NO), and normally closed (NC) contacts according to your application needs.
3. Handling: Handle with care to avoid damage to the internal components. Do not drop or subject to excessive mechanical shock.
4. Testing: Before installation, test the relay operation using a multimeter to check continuity across the contacts.
5. Maintenance: No regular maintenance is required. However, inspect periodically for signs of wear or damage.
6. Mounting: Mount on a flat surface using the provided mounting holes. Ensure adequate ventilation around the relay for heat dissipation.

(For reference only)