Details

---

BUY CM50TU-24F https://www.utsource.net/itm/p/387007.html
HIGH POWER SWITCHING USE

Parameter	Description	Value	Unit
Type	Relay Type	SPDT	-
Coil Voltage	Operating Voltage of the Coil	24	V DC
Coil Power	Power Consumption of the Coil	1.2	W
Coil Resistance	Resistance of the Coil	200	Ω
Contact Form	Number and Type of Contacts	SPDT	-
Contact Rating	Maximum Current per Contact	5	A
Insulation Voltage	Dielectric Strength Between Terminals	1000	V AC
Operating Temp.	Temperature Range for Operation	-40 to +85	°C
Storage Temp.	Temperature Range for Storage	-40 to +125	°C
Weight	Weight of the Relay	7	g

Instructions:

1. Installation:

   • Ensure that the relay is installed in a well-ventilated area.
   • Mount the relay on a flat surface using the provided mounting holes.

2. Electrical Connections:

   • Connect the coil terminals to the appropriate power supply according to the rated voltage.
   • Connect the load to the common (COM) and normally open (NO) or normally closed (NC) contacts as required.

3. Operation:

   • Apply the rated voltage to the coil terminals to activate the relay.
   • The contacts will switch from their resting state to the activated state when the coil is energized.

4. Maintenance:

   • Regularly inspect the relay for signs of wear or damage.
   • Ensure that all connections are secure and free from corrosion.

5. Precautions:

   • Do not exceed the maximum ratings specified in the parameter table.
   • Avoid exposing the relay to environments with high humidity, corrosive gases, or excessive dust.

(For reference only)