TTB6C135N16

TTB6C135N16

Category: Modules

Specifications
Details

BUY TTB6C135N16 https://www.utsource.net/itm/p/415641.html
THYRISTOR MODULE|3-PH FULL-WAVE|FULLY CNTLD|1.6KV VRRM|110A IT
Parameter Symbol Value Unit Notes
Absolute Maximum Ratings
Drain-Source Voltage VDS ±16 V Continuous rating
Gate-Source Voltage VGS ±20 V Continuous rating
Continuous Drain Current ID 135 A TC = 25°C
Pulse Drain Current IDM 450 A t = 10 μs, IGBT duty cycle = 1%
Power Dissipation PD 175 W TC = 25°C
Junction Temperature Tj -55 to 175 °C
Storage Temperature Tstg -55 to 150 °C
Thermal Resistance RθJC 0.4 °C/W Junction to case

Instructions for Use

  1. Handling Precautions: The TTB6C135N16 is sensitive to electrostatic discharge (ESD). Handle with care and use proper ESD protection measures.

  2. Mounting: Ensure that the device is mounted on a suitable heatsink to maintain the junction temperature within specified limits. The thermal resistance (RθJC) should be considered in the thermal design.

  3. Voltage and Current Limits: Do not exceed the absolute maximum ratings for drain-source voltage (VDS), gate-source voltage (VGS), continuous drain current (ID), or pulse drain current (IDM).

  4. Operating Temperature: Ensure that the operating temperature range of the device is maintained between -55°C and 175°C for junction temperature (Tj) and between -55°C and 150°C for storage temperature (Tstg).

  5. Power Dissipation: Keep the power dissipation within the rated limit of 175W at a case temperature (TC) of 25°C to avoid overheating.

  6. Pulse Operation: For pulse operation, ensure that the pulse duration and duty cycle do not exceed the specified values to prevent damage to the device.

  7. Gate Drive Requirements: Apply appropriate gate drive signals to ensure reliable switching performance. Avoid exceeding the gate-source voltage (VGS) ratings.

  8. Storage Conditions: Store the device in a dry environment within the specified storage temperature range to prevent damage.

  9. Testing: Before incorporating the device into a circuit, verify its parameters using standard testing procedures to ensure it meets the required specifications.

  10. Compliance and Standards: Ensure that the application complies with relevant safety and regulatory standards.

(For reference only)

View more about TTB6C135N16 on main site