Details

---

BUY FF200R12KS4 https://www.utsource.net/itm/p/422921.html
IGBT Modules up to 1200V Dual ; Package: AG-62MM-1; IC max: 200.0 A; VCEsat typ: 3.2 V; Configuration: Dual Modules; Technology: IGBT2 Fast; Housing: 62 mm;

Parameter	Symbol	Min	Typ	Max	Unit	Notes
Rated Voltage	VDSS	-	1200	-	V
Rated Current	ID	-	200	-	A
Continuous Drain Current	ID	-	200	-	A	@ Tc = 25°C, VGS = 15V
Pulse Drain Current	ICM	-	300	-	A	@ Tc = 25°C, VGS = 15V, t = 10μs
Gate-Source Voltage	VGS	-20	-	15	V
Gate-Source Leakage Current	IGSS	-	1	5	μA	@ VGS = ±10V, Tj = 25°C
Drain-Source On-State Resistance	RDS(on)	-	4.5	-	mΩ	@ VGS = 15V, ID = 200A, Tj = 25°C
Total Power Dissipation	PD	-	-	2400	W	@ Tc = 25°C
Junction-to-Case Thermal Resistance	RθJC	-	0.2	-	°C/W
Junction-to-Ambient Thermal Resistance	RθJA	-	0.6	-	°C/W
Storage Temperature Range	Tstg	-55	-	150	°C
Operating Junction Temperature	Tj	-55	-	150	°C

Instructions:

1. Mounting and Handling:

   • Ensure proper handling to avoid damage to the device.
   • Use appropriate heat sinks to manage thermal resistance and ensure efficient heat dissipation.

2. Electrical Connections:

   • Connect the drain (D), source (S), and gate (G) terminals correctly.
   • Ensure that the gate-source voltage (VGS) does not exceed the rated value of ±15V to prevent damage to the gate oxide.

3. Thermal Management:

   • The device should be mounted on a suitable heatsink to maintain the junction temperature within the specified range.
   • Monitor the operating temperature to avoid exceeding the maximum junction temperature of 150°C.

4. Pulse Operation:

   • For pulse operation, ensure that the pulse current (ICM) does not exceed 300A for a duration of 10μs to prevent overheating and potential failure.

5. Storage:

   • Store the device in a dry, cool place to avoid moisture and temperature-related damage.
   • Keep the device in its original packaging until ready for use to protect it from static discharge.

6. Testing:

   • Before installation, perform a visual inspection to ensure there are no physical damages.
   • Test the device parameters using appropriate test equipment to verify that they meet the specifications.

7. Safety:

   • Follow all safety guidelines and precautions when handling high-voltage and high-current components.
   • Use appropriate personal protective equipment (PPE) and work in a well-ventilated area.

(For reference only)