Details

---

BUY CD74HCT4020E https://www.utsource.net/itm/p/438798.html
LMC6035/LMC6036 Low Power 2.7V Single Supply CMOS Operational Amplifiers; Package: MICRO SMD; No of Pins: 8

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VCC	Operating	2.0	-	6.0	V
Input Low Voltage	VIL	VCC = 5V	0.8	-	-	V
Input High Voltage	VIH	VCC = 5V	-	-	3.5	V
Output Low Voltage	VOL	IOL = 16mA, VCC = 5V	0.25	-	-	V
Output High Voltage	VOH	IOH = -0.4mA, VCC = 5V	-	-	4.75	V
Propagation Delay Time	tpd	VCC = 5V, TA = 25°C	-	60	-	ns
Power Dissipation	PD	Maximum at TA = 70°C	-	-	100	mW
Operating Temperature Range	TA	-	-40	-	85	°C
Storage Temperature Range	TSTG	-	-65	-	150	°C

Instructions for Using the CD74HCT4020E

1. Power Supply:

   • Ensure the supply voltage (V_CC) is within the range of 2.0V to 6.0V.
   • Connect the ground (GND) pin to a stable 0V reference.

2. Input Signals:

   • For a low input signal, the voltage should be less than or equal to 0.8V when V_CC is 5V.
   • For a high input signal, the voltage should be greater than or equal to 3.5V when V_CC is 5V.

3. Output Signals:

   • The output low voltage (V_OL) should not exceed 0.25V when sourcing 16mA and V_CC is 5V.
   • The output high voltage (V_OH) should be at least 4.75V when sinking -0.4mA and V_CC is 5V.

4. Propagation Delay:

   • The propagation delay time (t_pd) is typically 60ns at V_CC = 5V and T_A = 25°C.

5. Power Dissipation:

   • The maximum power dissipation (P_D) should not exceed 100mW at T_A = 70°C.

6. Temperature Ranges:

   • The operating temperature range (T_A) is from -40°C to 85°C.
   • The storage temperature range (T_STG) is from -65°C to 150°C.

7. Handling:

   • Handle the device with care to avoid damage from electrostatic discharge (ESD).
   • Use appropriate ESD protection measures during handling and installation.

8. Mounting:

   • Ensure proper mounting and soldering techniques to avoid thermal and mechanical stress on the device.

9. Testing:

   • Test the device under specified conditions to ensure it meets the required performance parameters.

10. Application Notes:

    • Refer to the datasheet for detailed application notes and circuit diagrams to ensure optimal performance in your specific application.

(For reference only)