Details

---

BUY EPF10K10TC144-4 https://www.utsource.net/itm/p/449872.html
FLEX10K Embedded Programmable Logic Device1.92 M

Parameter	Description	Value
Device Type	Complex Programmable Logic Device (CPLD)	EPF10K10TC144-4
Family	FLEX 10K
Package	TQFP (144-Pin)
Speed Grade	-4
Logic Cells	Number of Logic Cells	10,000
I/O Pins	Number of I/O Pins	92
Max User I/O Pins	Maximum User I/O Pins	88
Internal RAM (bits)	Internal RAM Size	2560
Internal ROM (bits)	Internal ROM Size	0
Multipliers	Number of Multipliers	0
Max Clock Frequency	Maximum Clock Frequency	133 MHz
Supply Voltage (Vcc)	Supply Voltage Range	3.3V ± 0.3V
I/O Voltage	I/O Voltage Range	3.3V ± 0.3V
Power Consumption	Typical Power Consumption	1.5W (active), 0.1W (standby)
Operating Temperature	Operating Temperature Range	-40°C to +85°C
Storage Temperature	Storage Temperature Range	-65°C to +150°C
Package Body Size	Package Body Size (L x W x H)	20 mm x 20 mm x 1.4 mm
Lead Finish	Lead Finish	Tin/Lead (Sn/Pb)
RoHS Compliance	RoHS Compliant	No

Instructions for Use

1. Power Supply:

   • Ensure that the supply voltage (Vcc) is within the specified range of 3.3V ± 0.3V.
   • Connect the Vcc pin to a stable 3.3V power source and ground (GND) pins to a common ground.

2. Programming:

   • Use a compatible programmer such as the Altera ByteBlaster or USB-Blaster.
   • Follow the programming instructions provided by the Altera Quartus software suite.
   • Ensure that the device is properly configured with the desired logic design before use.

3. I/O Configuration:

   • Configure the I/O pins according to the design requirements using the Quartus software.
   • Set the appropriate input/output modes and drive strengths for each pin.

4. Clocking:

   • Connect an external clock source to the clock input pin (CLK) if required.
   • Ensure that the clock frequency does not exceed the maximum specified frequency of 133 MHz.

5. Thermal Management:

   • Ensure adequate cooling for the device, especially in high-power applications.
   • Consider using a heatsink or thermal pad if operating at high temperatures or under heavy load.

6. Storage and Handling:

   • Store the device in a dry, cool environment within the specified storage temperature range.
   • Handle the device with care to avoid damage to the pins and package.

7. ESD Protection:

   • Use proper ESD protection measures when handling the device to prevent electrostatic discharge damage.
   • Ground yourself and your equipment before touching the device.

8. Testing:

   • Perform functional testing after programming to ensure the device operates as expected.
   • Use boundary-scan testing (JTAG) for additional verification if available.

For detailed technical specifications and additional information, refer to the Altera FLEX 10K datasheet and user guides.

(For reference only)