Details

---

BUY SN7497N https://www.utsource.net/itm/p/477926.html
SYNCHRONOUS 6-BIT BINARY RATE MULTIPLIERS

Parameter	Symbol	Min	Typ	Max	Unit	Notes
Supply Voltage	VCC	4.5	5.0	5.5	V	Operating supply voltage
Output High Level	VOH	2.4	-	VCC - 0.5	V	Output high level voltage (IO = -1.6 mA)
Output Low Level	VOL	0	-	0.5	V	Output low level voltage (IO = 16 mA)
Input High Level	VIH	2.0	-	VCC - 0.8	V	Input high level voltage
Input Low Level	VIL	0	-	0.8	V	Input low level voltage
Propagation Delay Time	tpd	-	35	70	ns	Propagation delay time (VCC = 5 V, TA = 25°C)
Power Dissipation	PD	-	-	500	mW	Maximum power dissipation per package
Operating Temperature	TA	-40	-	85	°C	Ambient operating temperature range
Storage Temperature	TSTG	-65	-	150	°C	Storage temperature range

Instructions for Use:

1. Supply Voltage: Ensure the supply voltage (V_CC) is within the specified range of 4.5 V to 5.5 V. The typical operating voltage is 5.0 V.
2. Output Levels:
   • High Level (V_OH): The output high level voltage should be at least 2.4 V and can go up to V_CC - 0.5 V.
   • Low Level (V_OL): The output low level voltage should not exceed 0.5 V.
3. Input Levels:
   • High Level (V_IH): The input high level voltage should be at least 2.0 V and can go up to V_CC - 0.8 V.
   • Low Level (V_IL): The input low level voltage should not exceed 0.8 V.
4. Propagation Delay: The propagation delay time (t_pd) is typically 35 ns and can vary between 35 ns and 70 ns under standard conditions (V_CC = 5 V, T_A = 25°C).
5. Power Dissipation: The maximum power dissipation (P_D) for the device is 500 mW. Ensure that the device does not exceed this limit to avoid damage.
6. Operating Temperature: The device is designed to operate within an ambient temperature range of -40°C to 85°C.
7. Storage Temperature: When storing the device, ensure the temperature remains between -65°C and 150°C to prevent damage.

For detailed application notes and specific circuit design considerations, refer to the datasheet provided by the manufacturer.

(For reference only)