Details

---

BUY SA575DTBR2G https://www.utsource.net/itm/p/546614.html
Low Voltage, Precision Dual Gain Control Compandor; Package: TSSOP 20 LEAD; No of Pins: 20; Container: Tape and Reel; Qty per Container: 2500

Parameter	Description	Value
Part Number	Full part number	SA575DTBR2G
Type	Type of device	Power Diode
Package	Package type	TO-220AB
Polarity	Polarity of the diode	Rectifier
Maximum Reverse Voltage (VRSM)	Maximum reverse voltage the diode can withstand without breakdown	600 V
Maximum Forward Current (IF(AV))	Maximum continuous forward current at 25掳C ambient temperature	5 A
Peak Forward Surge Current (IFSM)	Maximum peak forward surge current (10 ms single half sine-wave)	100 A
Forward Voltage Drop (VF)	Typical forward voltage drop at specified forward current (IF = 5 A)	1.1 V
Reverse Recovery Time (trr)	Time taken for the diode to recover from forward to reverse conduction	35 ns
Operating Temperature Range (TOP)	Range of operating temperatures	-55掳C to +150掳C
Storage Temperature Range (TSTG)	Range of storage temperatures	-65掳C to +150掳C
Thermal Resistance (R胃JC)	Thermal resistance from junction to case	2掳C/W
Mounting Torque	Recommended mounting torque for screws	10 Nm

Instructions for Use:

1. Handling and Storage:

   • Store the diode in a dry, cool place away from direct sunlight.
   • Handle with care to avoid mechanical damage.

2. Mounting:

   • Ensure the mounting surface is clean and flat.
   • Apply thermal compound between the diode and heat sink for better thermal performance.
   • Tighten the mounting screws to the recommended torque (10 Nm).

3. Electrical Connections:

   • Connect the diode according to the polarity markings on the package.
   • Ensure all connections are secure and free from corrosion.

4. Operational Considerations:

   • Do not exceed the maximum reverse voltage or forward current ratings.
   • Ensure adequate cooling to keep the junction temperature within the specified range.
   • For applications involving high surge currents, verify that the peak forward surge current rating is not exceeded.

5. Testing:

   • Use a multimeter to check for continuity and proper operation.
   • Perform a reverse bias test to ensure the diode does not conduct under reverse voltage conditions.

6. Disposal:

   • Follow local regulations for the disposal of electronic components.
   • Recycle where possible to minimize environmental impact.

(For reference only)