Details

---

BUY LM319DT https://www.utsource.net/itm/p/654119.html
High speed dual comparators

Below is the parameter table and instructions for the LM319DT comparator:

LM319DT Parameter Table

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Supply Voltage	( V_ )	2.0	-	36	V	-
Input Voltage Range	( V_ )	( V_ + 1.5 )	-	( V_ - 1.5 )	V	-
Output Voltage (High)	( V_ )	-	( V_ - 1.5 )	( V_ - 0.5 )	V	( I_O = 4 text )
Output Voltage (Low)	( V_ )	0.1	-	0.4	V	( I_O = 8 text )
Input Offset Voltage	( V_ )	-10	2	10	mV	( V_ = 15 text )
Input Bias Current	( I_ )	100	200	300	nA	( V_ = 15 text )
Input Offset Current	( I_ )	-10	2	10	nA	( V_ = 15 text )
Propagation Delay Time	( t_d )	350	550	750	ns	( V_ = 15 text, text = 150 text )
Operating Temperature Range	( T_A )	-40	-	125	°C	-

LM319DT Instructions

1. Supply Voltage:

   • The LM319DT can operate from a single supply voltage ranging from 2.0V to 36V.
   • For optimal performance, ensure the supply voltage is within the specified range.

2. Input Voltage Range:

   • The input voltages should be within the range ( V_ + 1.5 ) V to ( V_ - 1.5 ) V to avoid damage to the device.
   • Ensure that the input signals do not exceed these limits to prevent latch-up or damage.

3. Output Voltage:

   • The output voltage when high is typically ( V_ - 1.5 ) V and can drop to ( V_ - 0.5 ) V under a load of 4 mA.
   • The output voltage when low is typically between 0.1 V and 0.4 V under a load of 8 mA.

4. Input Offset Voltage:

   • The input offset voltage is typically 2 mV and can vary between -10 mV and 10 mV.
   • This parameter affects the accuracy of the comparator and should be considered in precision applications.

5. Input Bias and Offset Current:

   • The input bias current is typically 200 nA and can vary between 100 nA and 300 nA.
   • The input offset current is typically 2 nA and can vary between -10 nA and 10 nA.
   • These parameters are important for ensuring accurate comparisons, especially in high-impedance circuits.

6. Propagation Delay Time:

   • The propagation delay time is the time it takes for the output to change state after the input crosses the threshold.
   • Typically, the delay is 550 ns, but it can range from 350 ns to 750 ns.
   • This parameter is crucial for timing-sensitive applications.

7. Operating Temperature:

   • The LM319DT can operate over a wide temperature range from -40°C to 125°C.
   • Ensure that the operating environment does not exceed these limits to maintain reliable operation.

8. Handling and Storage:

   • Handle the device with care to avoid electrostatic discharge (ESD) damage.
   • Store the device in a dry, cool place to prevent moisture damage.

By following these parameters and instructions, you can ensure the proper operation and longevity of the LM319DT comparator in your circuits.

(For reference only)