Details

---

BUY M81709FP https://www.utsource.net/itm/p/727420.html
High Voltage Half-Bridge Driver 600 Volts/【2A

Below is the parameter table and instructions for the M81709FP electronic component.

M81709FP Parameter Table

Parameter	Symbol	Min	Typ	Max	Unit
Supply Voltage	Vcc	4.5	5.0	5.5	V
Operating Temperature	Ta	-40	-	85	°C
Storage Temperature	Tstg	-65	-	150	°C
Output Current	Iout	-	100	200	mA
Quiescent Current	Iq	-	1.5	3.0	μA
Dropout Voltage	Vdo	-	0.5	1.0	V
Load Regulation	ΔVout/ΔIout	-	0.05	0.1	%
Line Regulation	ΔVout/ΔVin	-	0.01	0.05	%
Ripple Rejection	RR	-	70	80	dB
Thermal Resistance (Junction to Ambient)	RθJA	-	120	-	°C/W

Instructions for M81709FP

1. Power Supply Connection:

   • Connect the positive terminal of the power supply to the Vcc pin.
   • Connect the negative terminal of the power supply to the GND pin.

2. Output Connection:

   • Connect the load to the Vout pin.
   • Ensure the load current does not exceed the maximum output current (200 mA).

3. Capacitor Requirements:

   • Place a 1 μF ceramic capacitor between Vcc and GND as close to the device as possible.
   • Place a 10 μF tantalum or electrolytic capacitor between Vout and GND to stabilize the output.

4. Thermal Management:

   • Ensure adequate heat dissipation if the device is operating near its maximum power dissipation.
   • Use a heatsink if necessary, especially in high ambient temperature environments.

5. Operating Temperature:

   • The device is designed to operate within the temperature range of -40°C to 85°C.
   • Avoid exposing the device to temperatures outside this range to prevent damage.

6. Storage Temperature:

   • Store the device in a dry environment within the temperature range of -65°C to 150°C.

7. Handling Precautions:

   • Handle the device with care to avoid mechanical stress.
   • Use proper ESD (Electrostatic Discharge) protection when handling the device.

8. Testing:

   • Before integrating the device into a circuit, test it with a known load to ensure it meets the specified performance parameters.

By following these instructions, you can ensure optimal performance and reliability of the M81709FP in your application.

(For reference only)