Details

---

BUY TIBPAL16R4-15CN https://www.utsource.net/itm/p/774923.html
HIGH-PERFORMANCE IMPACT PAL CIRCUITS

Parameter	Value	Unit
Part Number	TIBPAL16R4-15CN	-
Type	Power Inductor	-
Inductance	15	μH
DC Resistance (DCR)	0.88	mΩ
Rated Current (Irms)	23.9	A
Saturation Current (Isat)	57.5	A
Operating Temperature	-55 to +125	°C
Case Size	1608 (16x8)	mm
Shielding	Shielded	-
Tolerance	±20%	%

Instructions for Use:

1. Handling and Storage:

   • Store in a dry, cool place away from direct sunlight.
   • Handle with care to avoid mechanical damage.

2. Soldering:

   • Preheat components to 120°C ± 10°C for 2 minutes before soldering.
   • Soldering temperature should not exceed 260°C.
   • Soldering time should not exceed 10 seconds per joint.

3. Mounting:

   • Ensure proper alignment during mounting to avoid mechanical stress.
   • Use appropriate mounting techniques to ensure good electrical and thermal contact.

4. Electrical Testing:

   • Test inductance using a suitable LCR meter.
   • Verify DC resistance (DCR) to ensure it meets specifications.
   • Check for any short circuits or open circuits.

5. Environmental Considerations:

   • Ensure the operating environment does not exceed the specified temperature range.
   • Avoid exposure to corrosive gases and liquids.

6. Compliance:

   • Ensure the component complies with all relevant safety and regulatory standards for your application.

(For reference only)