Details

---

BUY MAX705CSA https://www.utsource.net/itm/p/829554.html
Low-Cost, μP Supervisory Circuits The MAX705MAX708/MAX813L microprocessor (μP) supervisory circuits reduce the complexity and number of components required to monitor power-supply and battery functions in μP systems. These devices significantly improve system reliability and accuracy compared to separate ICs or discrete components. The MAX705/MAX706/MAX813L provide four functions: 1. A reset output during power-up, power-down, and brownout conditions. 2. An independent watchdog output that goes low if the watchdog input has not been toggled within 1.6 seconds. 3. A 1.25V threshold detector for power-fail warning, low-battery detection, or for monitoring a power supply other than +5V. 4. An active-low manual-reset input. The MAX707/MAX708 are the same as the MAX705/MAX706, except an active-high reset is substituted for the watchdog timer. The MAX813L is the same as the MAX705, except RESET is provided instead of active-low RESET. Two supply-voltage monitor levels are available: The MAX705/MAX707/MAX813L generate a reset pulse when the supply voltage drops below 4.65V, while the MAX706/MAX708 generate a reset pulse below 4.40V. All four parts are available in 8-pin DIP, SO and μMAX? packages.
Description: Low-Dropout, 150mA, Adjustable and Fixed-Voltage Regulators Features: 150mA Output Current Low Dropout Voltage: 200mV (Typ) at 150mA Adjustable Output Voltage: 1.2V to 15V Fixed Output Voltages: 5V, 6V, 8V, 9V, 10V, 12V Low Quiescent Current: 10mA (Typ) Low Temperature Coefficient: 0.01%/°C (Typ) Output Voltage Accuracy: ±2% (Max) Overcurrent Protection Short-Circuit Protection Thermal Shutdown Available in SOP-8 Package Applications: Battery-Powered Systems Portable Instruments Cellular Phones Hand-Held Computers Notebook Computers PCMCIA Cards Automotive Electronics (For reference only)