Details

---

BUY MM74HC373N https://www.utsource.net/itm/p/830711.html
Sensitive Gate Silicon Controlled Rectifier; Package: TO-225; No of Pins: 3; Container: Bulk; Qty per Container: 500

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VCC		2.0	-	6.0	V
Input Voltage (High)	VIH	II = 10 μA	2.0	-	VCC - 0.5	V
Input Voltage (Low)	VIL	II = -10 μA	0	-	0.8	V
Output Voltage (High)	VOH	IO = -400 μA	VCC - 0.5	-	VCC	V
Output Voltage (Low)	VOL	IO = 400 μA	0	-	0.4	V
Propagation Delay Time	tpd	VCC = 4.5 V, TA = 25°C	10	-	30	ns
Latch Enable Time	tLE	VCC = 4.5 V, TA = 25°C	10	-	30	ns
Data Setup Time	tsetup	VCC = 4.5 V, TA = 25°C	10	-	30	ns
Data Hold Time	thold	VCC = 4.5 V, TA = 25°C	0	-	10	ns
Storage Temperature	Tstg		-65	-	150	°C
Operating Temperature	TA		-40	-	85	°C

Instructions for Use

1. Power Supply:

   • Ensure the supply voltage (V_CC) is within the range of 2.0 V to 6.0 V.
   • Connect the ground (GND) pin to a stable ground reference.

2. Input Signals:

   • The input signals should be within the valid logic levels:
     • High: V_IH should be between 2.0 V and V_CC - 0.5 V.
     • Low: V_IL should be between 0 V and 0.8 V.

3. Output Signals:

   • The output signals will be:
     • High: V_OH will be between V_CC - 0.5 V and V_CC.
     • Low: V_OL will be between 0 V and 0.4 V.

4. Timing Parameters:

   • Ensure that the data setup time (t_setup) and hold time (t_hold) are met to avoid data corruption.
   • The propagation delay time (t_pd) and latch enable time (t_LE) should be considered for timing-critical applications.

5. Temperature Considerations:

   • The device can operate within the temperature range of -40°C to 85°C.
   • Store the device within the storage temperature range of -65°C to 150°C.

6. Handling:

   • Handle the device with care to avoid static damage. Use proper ESD protection measures.
   • Avoid exposing the device to excessive humidity and mechanical stress.

7. Applications:

   • The MM74HC373N is suitable for applications requiring latching of data, such as in memory buffers, data latches, and digital signal processing circuits.

(For reference only)