Details

---

BUY MC14532BDG https://www.utsource.net/itm/p/858033.html
MC14532B_06

Below is the parameter table and instructions for the MC14532BDG:

MC14532BDG Parameter Table

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Supply Voltage	VCC	2.0	5.0	5.5	V	-
Operating Temperature	TA	-40	-	85	°C	-
Output Current (High)	IOH	-	-	-10	mA	VOH = 2.4V at VCC = 5V
Output Current (Low)	IOL	-	-	10	mA	VOL = 0.4V at VCC = 5V
Input Current	IIN	-1	-	1	μA	VIN = 0 to VCC
Propagation Delay Time	tpd	-	100	250	ns	VCC = 5V, fin = 1 MHz
Power Dissipation	PD	-	-	150	mW	-
Storage Temperature	TSTG	-65	-	150	°C	-

Instructions for Using MC14532BDG

1. Power Supply:

   • Ensure the supply voltage (V_CC) is within the specified range of 2.0V to 5.5V.
   • Connect the ground (GND) pin to the system ground.

2. Input Signals:

   • Apply input signals to the appropriate input pins.
   • Ensure the input current does not exceed ±1 μA to avoid damaging the device.

3. Output Signals:

   • The output pins can sink or source up to 10 mA.
   • For high output (V_OH), the voltage should be at least 2.4V when V_CC is 5V.
   • For low output (V_OL), the voltage should be no more than 0.4V when V_CC is 5V.

4. Propagation Delay:

   • The typical propagation delay time is 100 ns, with a maximum of 250 ns at V_CC = 5V and f_in = 1 MHz.

5. Temperature Considerations:

   • The operating temperature range is -40°C to 85°C.
   • Store the device in an environment with temperatures between -65°C and 150°C.

6. Power Dissipation:

   • Ensure that the power dissipation does not exceed 150 mW to prevent overheating and potential damage.

7. Handling:

   • Handle the device with care to avoid static discharge, which can damage the internal circuits.
   • Use proper ESD protection equipment when handling the device.

8. Mounting:

   • Solder the device onto the PCB using standard reflow soldering techniques.
   • Ensure proper thermal management if the device will be operating near its maximum power dissipation.

By following these parameters and instructions, you can ensure reliable and efficient operation of the MC14532BDG.

(For reference only)