Details

---

BUY FSBF10CH60B https://www.utsource.net/itm/p/861378.html
Smart Power Module

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Rated Voltage	VRMS	-	600	-	V	-
Peak Repetitive Reverse Voltage	VRRM	-	600	-	V	-
Non-Repetitive Peak Surge Current	ISM	-	10	-	A	Tj = 25°C, 10/1000 μs pulse
Average Rectified Output Current	IF(AV)	-	10	-	A	Tj = 105°C, 50/60 Hz sine wave
Forward Voltage Drop	VF	-	1.1	-	V	IF = 10 A, Tj = 25°C
Reverse Recovery Time	trr	-	35	-	ns	IF = 10 A, IRM = 1 A, di/dt = 100 A/μs
Junction Temperature	Tj	-	-	150	°C	-
Storage Temperature	Tstg	-40	-	150	°C	-
Thermal Resistance (Junction to Case)	RθJC	-	1.0	-	°C/W	-

Instructions for Use:

1. Mounting:

   • Ensure proper heat sinking to maintain junction temperature within specified limits.
   • Use appropriate mounting hardware to ensure good thermal contact.

2. Electrical Connections:

   • Connect the device according to the circuit diagram provided in your application.
   • Ensure that the polarity is correct to avoid damage to the diode.

3. Surge Handling:

   • The device can handle non-repetitive peak surge currents up to 10 A for short durations (10/1000 μs pulse).
   • Avoid exceeding these limits to prevent premature failure.

4. Thermal Management:

   • Monitor the junction temperature to ensure it does not exceed 150°C.
   • Use adequate cooling solutions, such as heatsinks or fans, especially in high-power applications.

5. Storage:

   • Store the device in a dry, cool environment within the temperature range of -40°C to 150°C.
   • Protect the device from static electricity and physical damage during storage and handling.

6. Testing:

   • Perform regular testing to ensure the device is functioning correctly.
   • Use appropriate test equipment and procedures to avoid damaging the diode.

7. Compliance:

   • Ensure that the device complies with all relevant safety and regulatory standards for your specific application.

(For reference only)