Details

---

BUY ADG774BR https://www.utsource.net/itm/p/1096522.html
CMOS 3 V/5 V, Wide Bandwidth Quad 2:1 Mux

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VDD		2.7		5.5	V
Digital Input Voltage	VIN		0		VDD	V
Leakage Current	IL	VOUT = 0V		1		nA
ON Resistance	RON	VOUT = VDD - 0.5V	0.6	1.2	2.0	Ω
OFF Isolation	ISO	VOUT = 0V			1	MΩ
Propagation Delay	tpd	VDD = 5V, CL = 15pF	5		15	ns
Power Dissipation	PD	All switches ON		100		μW
Operating Temperature	Toper		-40		85	°C
Storage Temperature	Tstg		-65		150	°C

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (VDD) is within the range of 2.7V to 5.5V.
   • Connect the power supply to the VDD pin and ground to the GND pin.

2. Digital Inputs:

   • Apply digital control signals to the input pins (S1, S2, etc.) within the range of 0V to VDD.
   • Ensure that the digital inputs are not left floating; use pull-up or pull-down resistors if necessary.

3. Analog Signals:

   • Connect the analog signals to the appropriate input/output (I/O) pins.
   • The leakage current (IL) should be considered when designing the circuit to minimize any potential errors.

4. Switching Characteristics:

   • The ON resistance (RON) is critical for signal integrity. Ensure that the resistance is within the specified range to avoid signal degradation.
   • The OFF isolation (ISO) ensures minimal crosstalk between channels when the switch is off.

5. Timing:

   • The propagation delay (tpd) affects the speed at which the switch can operate. Ensure that the delay is within the acceptable range for your application.

6. Thermal Considerations:

   • The operating temperature (Toper) should be maintained between -40°C and 85°C.
   • Store the device in an environment where the storage temperature (Tstg) does not exceed -65°C to 150°C.

7. Power Dissipation:

   • The power dissipation (PD) should be kept below 100 μW to ensure reliable operation and prevent overheating.

8. Handling:

   • Handle the device with care to avoid static damage. Use proper ESD protection measures during handling and assembly.

9. Testing:

   • Before integrating the ADG774BR into your design, test it under typical operating conditions to ensure it meets the required specifications.

10. Documentation:

    • Refer to the datasheet for detailed information on pin configurations, electrical characteristics, and mechanical dimensions.

(For reference only)