Details

---

BUY DS1267S-100 https://www.utsource.net/itm/p/1102979.html
CONNECTOR ACCESSORY

Parameter	Symbol	Conditions	Min	Typical	Max	Unit
Operating Voltage	Vcc		4.5		5.5	V
Standby Current	Icc	Vcc = 5V		10		μA
Active Current	Icc	Vcc = 5V, All ON		30		mA
Output Voltage (High)	VOH	Vcc = 5V, IOL=0mA	4.2		5.0	V
Output Voltage (Low)	VOL	Vcc = 5V, IOH=0mA	0		0.4	V
Output Current (Sink)	IOL	VOL = 0.4V		10	20	mA
Output Current (Source)	IOH	VOH = 4.2V		-10	-20	mA
Input Voltage (High)	VIH		2.0		5.5	V
Input Voltage (Low)	VIL		0		0.8	V
Propagation Delay Time	tpd	Vcc = 5V	10		30	ns
Storage Temperature	Tstg		-65		150	°C
Operating Temperature	Topr		0		70	°C

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage is within the specified range (4.5V to 5.5V).
   • Use a stable power source to avoid fluctuations that could affect performance.

2. Current Limits:

   • Do not exceed the maximum output current limits (20mA sink, 20mA source) to prevent damage to the device.
   • The typical active current consumption is 30mA when all outputs are on.

3. Signal Levels:

   • Ensure input signals meet the required high (VIH > 2.0V) and low (VIL < 0.8V) voltage levels.
   • Output signals will be high (VOH > 4.2V) or low (VOL < 0.4V) under normal operating conditions.

4. Timing:

   • The propagation delay time (tpd) is between 10ns and 30ns at Vcc = 5V. This should be considered in timing-sensitive applications.

5. Temperature:

   • The device can operate within a temperature range of 0°C to 70°C.
   • Store the device in a temperature range of -65°C to 150°C to ensure long-term reliability.

6. Handling:

   • Handle the device with care to avoid static discharge, which can damage sensitive components.
   • Follow standard ESD (Electrostatic Discharge) precautions during handling and installation.

7. Mounting:

   • Ensure proper mounting and soldering techniques to avoid mechanical stress and thermal issues.
   • Use appropriate cooling methods if operating in high-temperature environments.

8. Testing:

   • Verify the functionality of the device using a known good test setup before integrating it into a larger system.
   • Regularly check for any signs of wear or malfunction to ensure continued reliable operation.

(For reference only)