SN74CB3T3384PWRG4
Specifications
SKU
1111354
Details
BUY SN74CB3T3384PWRG4 https://www.utsource.net/itm/p/1111354.html
10-Bit FET Bus Switch 2.5-V/3.3-V Low-Voltage Bus Switch with 5-V-Tolerant Level Shifter 24-TSSOP -40 to 85
| Parameter | Symbol | Min | Typ | Max | Unit | Notes |
|---|---|---|---|---|---|---|
| Supply Voltage | VCC | 1.65 | - | 3.6 | V | |
| Input Voltage (High) | VIH | 0.7VCC | - | VCC | V | |
| Input Voltage (Low) | VIL | 0 | - | 0.3VCC | V | |
| Output Voltage (High) | VOH | 0.9VCC | - | VCC | V | |
| Output Voltage (Low) | VOL | 0 | - | 0.1VCC | V | |
| Input Current | IIN | - | - | ±1 | μA | |
| Output Current (Source) | IOH | - | - | 4 | mA | |
| Output Current (Sink) | IOL | - | - | 8 | mA | |
| Propagation Delay Time | tpd | - | 4.5 | 7 | ns | @ VCC=3.3V, TA=25°C |
| Power Dissipation | PD | - | - | 225 | mW | Per Channel |
| Operating Temperature | TA | -40 | - | 125 | °C | |
| Storage Temperature | TSTG | -65 | - | 150 | °C |
Instructions for Use:
Power Supply:
- Ensure the supply voltage (VCC) is within the specified range of 1.65V to 3.6V.
- Connect the ground (GND) pin to the system ground.
Input Signals:
- Apply input signals within the valid logic levels:
- High: VIH should be between 0.7VCC and VCC.
- Low: VIL should be between 0V and 0.3VCC.
- Apply input signals within the valid logic levels:
Output Signals:
- The output signals will be:
- High: VOH will be between 0.9VCC and VCC.
- Low: VOL will be between 0V and 0.1VCC.
- The output signals will be:
Current Handling:
- Ensure that the output current does not exceed the maximum ratings:
- Source: 4mA
- Sink: 8mA
- Ensure that the output current does not exceed the maximum ratings:
Propagation Delay:
- The propagation delay time (tpd) is typically 4.5ns with a maximum of 7ns at VCC = 3.3V and ambient temperature (TA) = 25°C.
Temperature Considerations:
- Operate the device within the specified operating temperature range (-40°C to 125°C).
- Store the device within the storage temperature range (-65°C to 150°C).
Power Dissipation:
- Ensure that the power dissipation per channel does not exceed 225mW to avoid overheating.
Handling Precautions:
- Handle the device with care to avoid static discharge, which can damage the internal circuits.
- Follow standard ESD (Electrostatic Discharge) precautions when handling the device.
View more about SN74CB3T3384PWRG4 on main site
