Details

---

BUY CY62128BLL-70ZC https://www.utsource.net/itm/p/1119354.html
Dual-Bit Dual Supply Transceiver with Configurable Voltage Translation and 3-State Outputs 8-US8 -40 to 85

Parameter	Description	Value
Device Type	Type of Memory	128K x 8 CMOS SRAM
Package	Package Type	32-Pin Plastic Fine Pitch Ball Grid Array (TFBGA)
Operating Voltage (VCC)	Supply Voltage Range	2.5V to 3.6V
Standby Current (ISB)	Current Consumption in Standby Mode	1 μA (Typical) at VCC = 3.0V, TA = 25°C
Active Current (ICC)	Current Consumption in Active Mode	15 mA (Maximum) at VCC = 3.0V, fCLK = 70 MHz, TA = 25°C
Access Time (tAC)	Access Time from Address Valid to Data Valid	7 ns (Maximum) at VCC = 3.0V, fCLK = 70 MHz, TA = 25°C
Cycle Time (tCYC)	Minimum Cycle Time	14 ns (Maximum) at VCC = 3.0V, fCLK = 70 MHz, TA = 25°C
Data Hold Time (tDH)	Data Hold Time	0 ns (Minimum) at VCC = 3.0V, fCLK = 70 MHz, TA = 25°C
Address Setup Time (tAS)	Address Setup Time Before Chip Enable	3 ns (Minimum) at VCC = 3.0V, fCLK = 70 MHz, TA = 25°C
Write Recovery Time (tWR)	Write Recovery Time	7 ns (Minimum) at VCC = 3.0V, fCLK = 70 MHz, TA = 25°C
Output Enable Time (tOE)	Output Enable Time	7 ns (Maximum) at VCC = 3.0V, fCLK = 70 MHz, TA = 25°C
Output Disable Time (tOH)	Output Disable Time	7 ns (Maximum) at VCC = 3.0V, fCLK = 70 MHz, TA = 25°C
Operating Temperature Range (TA)	Ambient Operating Temperature	-40°C to +85°C
Storage Temperature Range (TSTG)	Storage Temperature	-65°C to +150°C
Mounting Orientation	Orientation for PCB Mounting	Horizontal or Vertical
RoHS Compliance	Compliance with RoHS Directives	Yes

Instructions for Use:

1. Power Supply: Ensure the supply voltage (VCC) is within the specified range of 2.5V to 3.6V.
2. Address and Data Lines: Connect the address lines (A0-A16) and data lines (DQ0-DQ7) to the appropriate pins on your system.
3. Control Signals: Connect the chip enable (CE), output enable (OE), and write enable (WE) signals to control the memory operations.
4. Power-On Reset: A power-on reset is not required, but ensure that the power supply is stable before enabling the device.
5. Temperature Considerations: Operate the device within the specified temperature range to avoid damage or malfunction.
6. Signal Timing: Adhere to the timing parameters to ensure reliable operation. Pay special attention to access time, cycle time, and setup/hold times.
7. Decoupling Capacitors: Place decoupling capacitors close to the power supply pins to minimize noise and improve stability.
8. Storage and Handling: Store the device in a dry environment and handle it with care to prevent static damage.

(For reference only)