Details

---

BUY 74HC4066D https://www.utsource.net/itm/p/1127718.html
Quad bilateral switches

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VCC	Operating	2.0	-	6.0	V
Input Voltage (High)	VIH	IIN = 1 μA	3.5	-	VCC	V
Input Voltage (Low)	VIL	IIN = 1 μA	0	-	1.5	V
Output Voltage (High)	VOH	IOL = -4 mA, VCC = 4.5 V	4.0	-	4.5	V
Output Voltage (Low)	VOL	IOL = 4 mA, VCC = 4.5 V	0	-	0.1	V
Leakage Current (ON)	ION	VCC = 4.5 V, VON = 0 V	-1	-	1	μA
Leakage Current (OFF)	IOFF	VCC = 4.5 V, VOFF = 0 V	-1	-	1	nA
Channel Resistance (ON)	RON	VCC = 4.5 V, ID = ±10 mA	-	40	-	Ω
Switching Time (ON to OFF)	tpd	VCC = 4.5 V, IL = 0 mA	-	10	-	ns
Storage Temperature Range	TSTG	-	-65	-	150	°C
Operating Temperature Range	TA	-	0	-	70	°C

Instructions for Using 74HC4066D:

1. Power Supply:

   • Ensure the supply voltage (V_CC) is within the range of 2.0 V to 6.0 V.
   • Connect the ground (GND) pin to the circuit ground.

2. Input Signals:

   • Apply logic high (V_IH) and low (V_IL) signals to control the switches. The input voltages should be within the specified ranges to ensure proper operation.

3. Output Signals:

   • When a switch is ON, the output voltage (V_OH or V_OL) will be close to the supply voltage or ground, respectively.
   • When a switch is OFF, the leakage current (I_OFF) should be minimal.

4. Channel Resistance:

   • The channel resistance (R_ON) when a switch is ON is typically around 40 Ω. This value can affect the performance in high-frequency applications.

5. Switching Time:

   • The propagation delay (t_pd) from ON to OFF state is approximately 10 ns. This is important for timing-sensitive applications.

6. Temperature Considerations:

   • The device can operate over a temperature range of 0°C to 70°C. For storage, the temperature range is -65°C to 150°C.

7. Handling Precautions:

   • Handle the device with care to avoid static damage.
   • Follow good soldering practices to prevent thermal stress on the device.

8. Testing:

   • Before integrating the 74HC4066D into your circuit, test it using a simple breadboard setup to ensure it meets the required specifications.

By following these instructions and parameters, you can effectively use the 74HC4066D in your electronic projects.

(For reference only)