Details

---

BUY SA572D https://www.utsource.net/itm/p/1185307.html
Dual Channel, High Performance Gain Control Compandor; Package: SO-16 WB; No of Pins: 16; Container: Rail; Qty per Container: 47

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	Vcc	Operating	4.5	5	5.5	V
Output Current	Iout	Continuous	-	100	-	mA
Quiescent Current	IQ	No load	-	0.1	-	mA
Output Voltage Drop	Vsat	Iout = 100mA	-	0.3	-	V
Dropout Voltage	Vdo	Iout = 100mA	-	0.5	-	V
Thermal Resistance	胃ja	Junction to Ambient	-	120	-	掳C/W
Operating Temperature	Topr	Junction	-40	-	85	掳C
Storage Temperature	Tstg	-	-40	-	150	掳C

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (Vcc) is within the specified range of 4.5V to 5.5V.
   • Use appropriate decoupling capacitors (e.g., 10渭F and 0.1渭F) close to the input and output pins to stabilize the supply and reduce noise.

2. Output Load:

   • The maximum continuous output current (Iout) is 100mA. Do not exceed this limit to avoid damage to the device.
   • If the output current exceeds 100mA, consider using additional external components or a different regulator.

3. Thermal Management:

   • The thermal resistance (胃ja) is 120掳C/W. Ensure adequate heat dissipation if the device is operating at high currents or in high ambient temperatures.
   • Consider using a heatsink if the device is expected to operate near its maximum power dissipation.

4. Temperature Range:

   • The operating temperature range (Topr) is from -40掳C to 85掳C. Ensure the device operates within this range to maintain reliability.
   • The storage temperature range (Tstg) is from -40掳C to 150掳C. Store the device in a dry environment within this range to prevent damage.

5. Output Voltage Drop:

   • The output voltage drop (Vsat) is typically 0.3V at 100mA. This should be considered when designing the power supply circuit to ensure the output voltage meets the required specifications.

6. Dropout Voltage:

   • The dropout voltage (Vdo) is typically 0.5V at 100mA. Ensure the input voltage is at least 0.5V higher than the desired output voltage to maintain regulation.

7. General Handling:

   • Handle the device with care to avoid static damage. Use proper ESD protection measures during handling and installation.
   • Follow standard PCB layout guidelines to minimize parasitic effects and ensure optimal performance.

(For reference only)