Details

---

BUY DS90CR216AMTD https://www.utsource.net/itm/p/1218445.html
+3.3V Rising Edge Data Strobe LVDS Receiver 28-Bit Channel LinkΑ66 MHz, +3.3V Rising Edge Strobe LVDS Receiver 21-Bit Channel LinkΑ66 MHz

Parameter	Description	Min	Typ	Max	Unit
Supply Voltage (VCC)	Operating supply voltage range	4.75	-	5.25	V
Output Voltage (VOH)	Output high level voltage	-	2.4	-	V (VCC = 5V, IOH = -4mA)
Output Voltage (VOL)	Output low level voltage	-	0.4	-	V (VCC = 5V, IOL = 16mA)
Input Voltage (VIH)	Input high level voltage	2.0	-	-	V (VCC = 5V)
Input Voltage (VIL)	Input low level voltage	-	-	0.8	V (VCC = 5V)
Operating Temperature	Temperature range for normal operation	-40	-	85	°C
Storage Temperature	Temperature range for storage	-65	-	150	°C
Maximum Power Dissipation	Maximum power dissipation	-	-	360	mW (TA = 85°C)
Propagation Delay (tPD)	Time delay from input to output	5	-	10	ns (VCC = 5V, TA = 25°C)
Skew (tSKEW)	Maximum difference in propagation delay between channels	-	-	1	ns (VCC = 5V, TA = 25°C)
Rise Time (tR)	Time for output to rise from 10% to 90% of final value	1	-	3	ns (VCC = 5V, TA = 25°C)
Fall Time (tF)	Time for output to fall from 90% to 10% of final value	1	-	3	ns (VCC = 5V, TA = 25°C)
Input Capacitance (CIN)	Capacitance at input pins	-	10	-	pF (f = 1 MHz)
Output Capacitance (COUT)	Capacitance at output pins	-	10	-	pF (f = 1 MHz)
Input Current (IIH)	Input current at high level	-	1	-	μA (VI = VCC, VCC = 5V)
Input Current (IIL)	Input current at low level	-	-1	-	μA (VI = 0V, VCC = 5V)
Output Current (IOH)	Output current at high level	-4	-	-	mA (VO = 2.4V, VCC = 5V)
Output Current (IOL)	Output current at low level	-	-	16	mA (VO = 0.4V, VCC = 5V)

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (VCC) is within the specified range of 4.75V to 5.25V.
   • Connect the ground (GND) pin to a stable ground reference.

2. Signal Levels:

   • Inputs should be driven with voltages within the VIH and VIL ranges.
   • Outputs will provide voltages within the VOH and VOL ranges when loaded appropriately.

3. Temperature Considerations:

   • Operate the device within the temperature range of -40°C to 85°C for optimal performance.
   • Store the device within the temperature range of -65°C to 150°C.

4. Power Dissipation:

   • Ensure that the power dissipation does not exceed 360 mW to avoid overheating.

5. Timing Parameters:

   • Account for the propagation delay (tPD) and skew (tSKEW) in your timing calculations.
   • Ensure that the rise time (tR) and fall time (tF) meet your system requirements.

6. Capacitance:

   • Consider the input and output capacitance values when designing your PCB layout and signal traces.

7. Current Ratings:

   • Ensure that the input currents (IIH, IIL) and output currents (IOH, IOL) do not exceed the specified limits to prevent damage to the device.

8. Handling:

   • Handle the device with care to avoid static discharge and physical damage.
   • Follow proper ESD (Electrostatic Discharge) precautions during handling and assembly.

(For reference only)