Details

---

BUY CD4013BP https://www.utsource.net/itm/p/1316465.html
Dual D-Type Flip-Flop; Package: SOIC; No of Pins: 14; Container: Rail

Parameter	Symbol	Min	Typ	Max	Unit
Supply Voltage	VCC	3	-	18	V
Input High Voltage	VIH	2	-	VCC-1.5	V
Input Low Voltage	VIL	-	-	0.8	V
Output High Voltage	VOH	VCC-0.1	-	-	V
Output Low Voltage	VOL	-	-	0.05	V
Propagation Delay Time	tp	-	100	300	ns
Power Dissipation	PD	-	-	100	mW
Operating Temperature	TA	-40	-	85	掳C
Storage Temperature	TSTG	-65	-	150	掳C

Instructions for Using CD4013BP

1. Supply Voltage (V_CC):

   • Ensure the supply voltage is within the range of 3V to 18V.
   • Avoid exceeding the maximum voltage to prevent damage to the device.

2. Input Voltages:

   • For a high input (V_IH), the voltage should be at least 2V and can go up to V_CC - 1.5V.
   • For a low input (V_IL), the voltage should not exceed 0.8V.

3. Output Voltages:

   • The output high voltage (V_OH) will be approximately V_CC - 0.1V.
   • The output low voltage (V_OL) will be no more than 0.05V.

4. Propagation Delay (t_p):

   • The typical propagation delay time is 100ns, with a maximum of 300ns. This is important for timing considerations in your circuit.

5. Power Dissipation (P_D):

   • The maximum power dissipation is 100mW. Ensure adequate heat sinking if operating near this limit.

6. Operating Temperature (T_A):

   • The device operates reliably between -40掳C and 85掳C. Avoid operating outside this range to prevent performance issues or damage.

7. Storage Temperature (T_STG):

   • Store the device between -65掳C and 150掳C to ensure long-term reliability.

8. Handling:

   • Handle the device with care to avoid static discharge, which can damage the internal circuits.
   • Use appropriate ESD protection when handling the device.

9. Pin Configuration:

   • Refer to the datasheet for the specific pin configuration of the CD4013BP to ensure correct connections in your circuit.

10. Testing:

    • Before integrating the CD4013BP into your final design, test it in a simple circuit to verify its functionality and parameters.

By following these instructions, you can ensure reliable operation and longevity of the CD4013BP in your electronic projects.

(For reference only)