Details

---

BUY 74ACT16245DGGR https://www.utsource.net/itm/p/1333292.html
Bus XCVR Dual 16-CH 3-ST 48-Pin TSSOP T/R

Parameter	Description	Value
Part Number	Product part number	74ACT16245DGGR
Function	Octal bus transceiver with three-state outputs
Technology	CMOS
Supply Voltage (Vcc)	Operating supply voltage	2.0 V to 3.6 V
Input Voltage (VIH)	High-level input voltage	Min: 2.0 V, Max: 3.6 V
Input Voltage (VIL)	Low-level input voltage	Min: 0 V, Max: 0.8 V
Output Voltage (VOH)	High-level output voltage	Min: Vcc - 0.1 V
Output Voltage (VOL)	Low-level output voltage	Max: 0.1 V
Propagation Delay	Time delay for signal propagation	Typ: 2.5 ns at Vcc = 3.3 V
Power Dissipation	Maximum power dissipation	500 mW
Operating Temperature	Temperature range for operation	-40°C to +85°C
Storage Temperature	Temperature range for storage	-65°C to +150°C
Package Type	Encapsulation type	TSSOP (Thin Shrink Small Outline Package)
Pins	Number of pins	24

Instructions:

1. Power Supply: Ensure the supply voltage is within the specified range of 2.0 V to 3.6 V.
2. Signal Levels: Input signals should not exceed the specified VIH and VIL levels to prevent damage or incorrect operation.
3. Installation: Place the device on a suitable PCB with proper grounding and decoupling capacitors near the power supply pins to minimize noise.
4. Heat Management: Although designed for low power consumption, ensure adequate heat dissipation if operating near maximum power limits.
5. Handling: Handle with care to avoid static damage; follow ESD (Electrostatic Discharge) precautions.
6. Testing: Before final assembly, test the device in a controlled environment to ensure all parameters meet specifications.
7. Storage: Store in recommended temperature conditions to preserve device integrity until ready for use.

(For reference only)