Details

---

BUY FS300R12KE3S1 https://www.utsource.net/itm/p/1351072.html
IGBT Modules up to 1600V / 1700V SixPACK; Package: AG-ECONOPP-1; IC max: 300.0 A; VCEsat typ: 2.0 V; Configuration: SixPACK; Technology: IGBT3; Housing: EconoPACK™ +;

Parameter	Symbol	Min	Typical	Max	Unit	Notes
Rated Voltage	VBR(DSS)	-	1200	-	V
Continuous Forward Current (TC = 25°C)	IF(AV)	-	300	-	A
Continuous Forward Current (TC = 100°C)	IF(AV)	-	240	-	A
Peak Forward Current (10 ms, 1 Hz)	IF(SM)	-	600	-	A
Reverse Recovery Time	trr	-	85	-	ns
Forward Voltage Drop (IF = 300 A, TJ = 25°C)	VF	-	1.9	-	V
Forward Voltage Drop (IF = 300 A, TJ = 125°C)	VF	-	2.2	-	V
Junction-to-Case Thermal Resistance	Rth(JC)	-	0.17	-	K/W
Storage Temperature Range	Tstg	-55	-	150	°C

Instructions for Use:

1. Mounting and Handling:

   • Ensure proper handling to avoid damage to the device.
   • Use appropriate mounting techniques to ensure good thermal contact with the heatsink.

2. Thermal Management:

   • Ensure adequate cooling to keep the junction temperature within safe limits.
   • Use a heatsink with sufficient thermal capacity to dissipate the heat generated by the device.

3. Electrical Connections:

   • Ensure all connections are secure and properly insulated to prevent short circuits.
   • Use high-quality wires and connectors suitable for the current and voltage ratings.

4. Operating Conditions:

   • Do not exceed the maximum rated voltage or current.
   • Operate the device within the specified temperature range to avoid thermal damage.

5. Testing and Verification:

   • Perform initial testing under controlled conditions to verify proper operation.
   • Regularly inspect the device for signs of wear or damage.

6. Storage:

   • Store the device in a dry, cool place away from direct sunlight and extreme temperatures.
   • Keep the device in its original packaging until ready for use.

7. Compliance:

   • Ensure that the device is used in compliance with all relevant safety and regulatory standards.

(For reference only)