Details

---

BUY M29W160ET70N6E https://www.utsource.net/itm/p/1363567.html
CLAMP

Parameter	Description	Value
Device	Flash Memory	M29W160ET70N6E
Manufacturer	STMicroelectronics	-
Package	SOP-8	-
Operating Voltage (Vcc)	Supply Voltage Range	2.7V to 3.6V
Memory Size	Total Memory	2M x 8 bits (16 Mbit)
Organization	Memory Organization	2,097,152 x 8 bits
Data Retention	Data Retention Time	20 years at 85°C
Write Cycle Time	Page Program Time	40 μs (max)
Sector Erase Time	Sector Erase Time	4 ms (max)
Chip Erase Time	Chip Erase Time	80 ms (max)
Operating Temperature	Industrial Temperature Range	-40°C to +85°C
Standby Current	Standby Current (Vcc = 3.0V)	1 μA (max)
Active Current	Active Current (Read)	10 mA (max)
Programming Current	Programming Current (Vpp = 12.5V)	15 mA (max)
Write Protect	Write Protect Pin	WP (active low)
Package Marking	Package Marking	M29W160ET70N6E
RoHS Compliance	RoHS Compliant	Yes

Instructions for Use:

1. Power Supply:

   • Connect Vcc to a stable power supply within the range of 2.7V to 3.6V.
   • Ensure Vss is connected to ground.

2. Address Lines:

   • Connect A0 to A20 to the address lines of your system to select the memory location.

3. Data Lines:

   • Connect D0 to D7 to the data lines of your system for data input and output.

4. Control Signals:

   • /CE (Chip Enable): Active low. When /CE is low, the device is selected.
   • /OE (Output Enable): Active low. When /OE is low, the output buffer is enabled.
   • /WE (Write Enable): Active low. When /WE is low, a write operation is initiated.
   • /WP (Write Protect): Active low. When /WP is low, write operations are inhibited.

5. Programming:

   • To program a page, set /CE and /WE low, and provide the address and data.
   • The programming time is 40 μs maximum.

6. Erase Operations:

   • Sector Erase: Set /CE low, and provide the sector address with the appropriate command. The erase time is 4 ms maximum.
   • Chip Erase: Set /CE low, and provide the chip erase command. The erase time is 80 ms maximum.

7. Standby Mode:

   • To enter standby mode, set /CE high. The standby current is 1 μA maximum.

8. Temperature Considerations:

   • Operate the device within the temperature range of -40°C to +85°C to ensure reliable performance.

9. Handling:

   • Handle the device with care to avoid ESD damage. Follow standard ESD precautions.

10. RoHS Compliance:

    • The device is RoHS compliant, ensuring it meets environmental standards.

(For reference only)