Details

---

BUY HCF4047BF https://www.utsource.net/itm/p/1371354.html
Monostable Multivibrator

Parameter	Symbol	Min	Typ	Max	Unit	Description
Supply Voltage	VCC	3	-	15	V	Operating supply voltage range
Output Current	IO	-	2.5	16	mA	Maximum output current per output pin
Input Current	II	-	1	10	渭A	Maximum input current per input pin
Propagation Delay Time	tpd	-	100	300	ns	Typical propagation delay time at VCC = 5V
Power Dissipation	PTOT	-	-	500	mW	Total power dissipation
Operating Temperature Range	TA	-40	-	85	掳C	Ambient temperature range
Storage Temperature Range	TSTG	-65	-	150	掳C	Temperature range for storage
Maximum Junction Temperature	TJ(max)	-	-	150	掳C	Maximum junction temperature

Instructions for Using HCF4047BF

1. Power Supply:

   • Ensure that the supply voltage (V_CC) is within the range of 3V to 15V.
   • Connect the ground (GND) pin to a stable ground reference.

2. Input Signals:

   • Apply input signals to the appropriate input pins.
   • Ensure that the input current does not exceed 10 渭A to avoid damaging the device.

3. Output Loads:

   • Connect the load to the output pins.
   • Ensure that the output current does not exceed 16 mA to prevent damage to the output transistors.

4. Propagation Delay:

   • Consider the typical propagation delay time of 100 ns to 300 ns when designing your circuit to ensure proper timing.

5. Thermal Management:

   • Keep the ambient temperature within the operating range of -40掳C to 85掳C.
   • Ensure adequate heat dissipation to keep the junction temperature below 150掳C.

6. Storage:

   • Store the device in a temperature-controlled environment between -65掳C and 150掳C to prevent damage.

7. Handling:

   • Handle the device with care to avoid static discharge, which can damage the sensitive components.
   • Use proper ESD protection measures during handling and installation.

8. Testing:

   • Test the device under the specified operating conditions to ensure it meets the required performance parameters.

9. Mounting:

   • Mount the device on a suitable PCB with appropriate soldering techniques to ensure reliable connections.

(For reference only)