Details

---

BUY CD4723BCN https://www.utsource.net/itm/p/1397039.html
CABLE ASSEMBLY; LEAD-FREE SOLDER; SMA MALE TO SMA MALE RIGHT ANGLE; 50 OHM, RG188A/U COAX

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VDD	Operating	2.0	-	5.5	V
Input Voltage Range	VI	-	0	-	VDD	V
Output Voltage Range	VO	-	0	-	VDD	V
Quiescent Current	IQ	VDD = 5V	-	10	-	μA
Output Current	IO	-	-	10	-	mA
Propagation Delay Time	tpd	VDD = 5V, VI = VDD/2	-	25	-	ns
Storage Temperature	TSTG	-	-65	-	150	°C
Operating Temperature	TA	-	0	-	70	°C

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (V_DD) is within the range of 2.0V to 5.5V.
   • Connect the ground (GND) pin to the circuit ground.

2. Input Signals:

   • Input signals should be within the range of 0V to V_DD.
   • Avoid applying voltages outside this range to prevent damage to the device.

3. Output Signals:

   • The output voltage will be within the range of 0V to V_DD.
   • Ensure the load connected to the output can handle up to 10mA of current.

4. Quiescent Current:

   • The quiescent current is typically 10μA at V_DD = 5V. This value should be considered when designing the power supply.

5. Propagation Delay:

   • The propagation delay time is typically 25ns at V_DD = 5V and V_I = V_DD/2. This is important for timing considerations in digital circuits.

6. Temperature Considerations:

   • Store the device in temperatures between -65°C and 150°C.
   • Operate the device within the temperature range of 0°C to 70°C to ensure reliable performance.

7. Handling:

   • Handle the device with care to avoid static discharge, which can damage sensitive components.
   • Follow proper soldering techniques to ensure good electrical connections and to avoid thermal stress on the device.

8. Mounting:

   • Ensure proper mounting and alignment of the device on the PCB to prevent mechanical stress and ensure reliable operation.

(For reference only)