Details

---

BUY SN74LVC541ANSR https://www.utsource.net/itm/p/1461112.html
OCTAL BUFFERS/DRIVERS WITH 3-STATE OUTPUT

Parameter	Symbol	Min	Typical	Max	Unit	Conditions
Supply Voltage	VCC	1.65	-	3.6	V	-
Input Low Voltage	VIL	-0.5	-	0.8	V	VCC = 1.65V to 3.6V
Input High Voltage	VIH	2.0	-	VCC + 0.5	V	VCC = 1.65V to 3.6V
Output Low Voltage	VOL	-0.5	-	0.1	V	IOL = 8 mA
Output High Voltage	VOH	2.4	-	VCC + 0.5	V	IOH = -4 mA
Input Leakage Current	IIL	-	-	±1	μA	VCC = 1.65V to 3.6V
Output Leakage Current	IOL	-	-	±1	μA	VCC = 1.65V to 3.6V
Propagation Delay Time	tpd	-	3.5	7	ns	VCC = 3.3V, TA = 25°C
Power Dissipation	Ptot	-	-	350	mW	TA = 25°C
Operating Temperature	TOP	-40	-	85	°C	-
Storage Temperature	TSTG	-65	-	150	°C	-

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (V_CC) is within the specified range of 1.65V to 3.6V.
   • Connect the ground (GND) pin to a stable reference potential.

2. Input Signals:

   • Apply input signals that meet the V_IL and V_IH specifications to avoid undefined behavior.
   • Ensure input signals do not exceed the maximum ratings to prevent damage to the device.

3. Output Signals:

   • The output signals will be driven to V_OL or V_OH depending on the input state.
   • Ensure the load connected to the output does not exceed the maximum current ratings (I_OL and I_OH).

4. Temperature Considerations:

   • Operate the device within the specified operating temperature range (-40°C to 85°C).
   • Store the device within the storage temperature range (-65°C to 150°C).

5. Propagation Delay:

   • Account for the propagation delay time (t_pd) in your timing calculations to ensure proper operation.

6. Power Dissipation:

   • Monitor the power dissipation to ensure it does not exceed the maximum rating (350 mW) to avoid overheating.

7. Handling:

   • Handle the device with care to avoid static discharge, which can damage the internal components.
   • Follow standard ESD (Electrostatic Discharge) precautions when handling the device.

8. Mounting:

   • Ensure proper mounting and soldering techniques to maintain reliable electrical connections and mechanical integrity.

By following these guidelines, you can ensure optimal performance and reliability of the SN74LVC541ANSR device in your application.

(For reference only)